1.01 / May 13, 2015
(3.5/5) (4)

Description

Alarm Il Notturno is the app that allows user remote management ofUnica alarm control panel, comfortably from your smartphone ortablet! Through this application, the user can control variousfunctions of the alarm system according to the installed modelpanel. The application provides the control of up to four systemsin WEB or SMS mode.Follows a list of key features for WEBmode:-View the status, arm and disarm individual partitions of thealarm control panel-Check for faults or anomalies;-Check for anddelete the alarm memory;-View the outputs status and activatethem;-Take pictures, if there are sensors with camera;-Access tothe event log and view associated pictures;-View zone status andenable/disable them;-View SIM card information and the panel GSMsignal level;Follows a list of key features for SMS mode:-View thestatus, arm and disarm individual partitions of the alarm controlpanel-View the outputs status and activate them;-View SIM cardinformation;The application works with all Android versions laterthan 2.2, both on smartphones and tablets. Vertical and horizontaloperating modes are supported. For alarm system connection you needa WAN connection for WEB mode and/or a GSM connection for SMS mode.Firmware version required on Unica control panel: 1.2.0.B121 orlater.Default pin: 12345

App Information Alarm Il Notturno

Sicep S.r.l. Show More...

My Sicep 1.16 APK
Sicep S.r.l.
My Sicep is the Sicep S.r.l. app that allows user remote managementof Unica and One alarm control panel, comfortably from yoursmartphone or tablet! Through this application, the user cancontrol various functions of the alarm system according to theinstalled model panel. The application provides the control of upto four systems in WEB or SMS mode. Follows a list of key featuresfor WEB mode: -View the status, arm and disarm individualpartitions of the alarm control panel -Check for faults oranomalies; -Check for and delete the alarm memory; -View theoutputs status and activate them; -Take pictures, if there aresensors with camera; -Access to the event log and view associatedpictures; -View zone status and enable/disable them; -View SIM cardinformation and the panel GSM signal level; Follows a list of keyfeatures for SMS mode: -View the status, arm and disarm individualpartitions of the alarm control panel -View the outputs status andactivate them; -View SIM card information; The application workswith all Android versions later than 2.2, both on smartphones andtablets. Vertical and horizontal operating modes are supported. Foralarm system connection you need a WAN connection for WEB modeand/or a GSM connection for SMS mode. Router port to be opened:8002. Firmware version required on Unica control panel: 1.2.0.B121or later. Default pin: 12345 Keywords: Sicep, Security, Unica,Central, Alarm System, System, Alarm, Arm, Control, Remote, HomeAutomation, GSM, GPRS, SMS.
Alarm Il Notturno 1.01 APK
Sicep S.r.l.
Alarm Il Notturno is the app that allows user remote management ofUnica alarm control panel, comfortably from your smartphone ortablet! Through this application, the user can control variousfunctions of the alarm system according to the installed modelpanel. The application provides the control of up to four systemsin WEB or SMS mode.Follows a list of key features for WEBmode:-View the status, arm and disarm individual partitions of thealarm control panel-Check for faults or anomalies;-Check for anddelete the alarm memory;-View the outputs status and activatethem;-Take pictures, if there are sensors with camera;-Access tothe event log and view associated pictures;-View zone status andenable/disable them;-View SIM card information and the panel GSMsignal level;Follows a list of key features for SMS mode:-View thestatus, arm and disarm individual partitions of the alarm controlpanel-View the outputs status and activate them;-View SIM cardinformation;The application works with all Android versions laterthan 2.2, both on smartphones and tablets. Vertical and horizontaloperating modes are supported. For alarm system connection you needa WAN connection for WEB mode and/or a GSM connection for SMS mode.Firmware version required on Unica control panel: 1.2.0.B121 orlater.Default pin: 12345
Personal Tracker 1.8 APK
Sicep S.r.l.
The Personal Tracker/APP by SICEP is an application for smartphonesdesigned for your safety, for the safety of those you care aboutand of the categories of people who are considered at greater risk(women, children, the elderly, the disabled, isolated workers,security guards, contractors, representatives, etc.)In the case ofdanger, by tapping a specific button or by shaking the device (alsowith the ‘man down’ function), a request for assistance is sent toa Security Centre with a MvsNET (SICEP) management system, alongwith the relative geographical coordinates to guarantee timelyassistance.The GPS function with tracking, activation viatapping/shaking or the ‘man down’ function, programmable speeddial, the option to activate cameras, connection with Surveillancelistening 24-hours a day, all make the Personal Tracker/APP bySICEP an indispensable tool for living safely and feeling secure,at all times and in any place. The main functions are:- sendingrequests for help to the Security Centre, via the followingmethods:a. Tapping a button on the main screen. The request sendsimmediately with tap and hold. b. Tapping the widget buttonc. ‘Mandown’ activation when the phone loses its vertical positiond.Shaking the phonee. Repeatedly pressing the phone’s power buttonuntil it vibrates. Press again when the phone vibratesd. Tappingthe bluetooth button linked to the App. Sends immediately with tapand hold-Pre-alarm for the ‘request for assistance’ and ‘man down’services-History of events and locations with memory of events andpotential GPS coordinates -Map display of the location history-Button for calling a preprogrammed number-Button for taking aphoto, to save and send to the Centre of Operations-Save and sendthe default location in the instance of the app always being usedin the same location-Privacy button
com.sicep.unica02 1.11 APK
Sicep S.r.l.
MySecurpolGroup è l'applicazione di Securpol Group S.r.l. checonsente agli utenti la gestione da remoto delle centrali diallarme Unica e One comodamente dal proprio smartphone o tablet!Attraverso questa applicazione, l’utente può controllare variefunzionalità dell’impianto di allarme dipendenti dal modello dicentrale installata. L'Applicazione prevede il controllo di unmassimo di 4 impianti in modalità WEB, Tunnel o SMS. In elenco lefunzionalità principali nella modalità WEB e Tunnel: -Visualizzarelo stato, inserire e disinserire le singole aree dell’impianto;-Verificare la presenza di guasti o anomalie; -Verificare lapresenza e cancellare la memoria degli allarmi; -Visualizzare lostato delle uscite ed attivarle; -Scattare foto nel caso vi sianosensori dotati di fotocamera; -Accedere allo storico degli eventi,e visualizzare eventuali foto associate; -Visualizzare lo statodelle zone del sistema e eventualmente abilitarle/disabilitarle;-Visualizzare informazioni sulla SIM e il livello del segnale GSMdella centrale; In elenco le funzionalità principali nella modalitàSMS: -Visualizzare lo stato, inserire e disinserire le singole areedell’impianto; -Visualizzare lo stato delle uscite ed attivarle;-Visualizzare informazioni sulla SIM; Applicazione funzionante contutte le versioni Android successive alla 2.2 sia su smarthphoneche su tablet. Modalità di funzionamento sia verticale cheorizzontale. Per la connessione dal lato centrale di allarme, ènecessario un collegamento in WAN per la modalità WEB e/o uncollegamento GSM per la modalità SMS. Porta router da aprire: 8002.Per la connessione in modalità Tunnel la centrale di allarme deverimanere collegata alla rete internet in modo permanente e deveessere impostata in modalità "Sempre Connesso". La connessione daapp verso la centrale di allarme avviene passando da una centraleoperativa Sicep MvsNET. La centrale operativa Sicep MvsNET deveinviare allo smartphone una email contenente un allegato per laconfigurazione della modalità Tunnel. Tale allegato deve essereaperto con la app. Versione firmware richiesta sulla centraleUnica: 1.2.0.B121 o successive. Pin di default: 12345 Parolechiave: Securpol, Group, Sicep, Sicurezza, Unica, One, Centrale,Antifurto, Sistema, Impianto, Allarme, Inserire, Controllo, Remoto,Domotica, GSM, GPRS, SMS. MySecurpolGroup is the application ofSecurpol Group srl that allows users remote management of alarmcenters and Unica One comfort of your smartphone or tablet! Throughthis application, the user can control various functions of theplant employees alarm from installed central model. The applicationprovides for the control of up to 4 plants in WEB mode, Tunnel orSMS. In the list the main features in the web and Tunnel mode:-View The status, arm and disarm the individual plant areas; -CheckFor failures or anomalies; -Check And erase the memory of alarms;-View The status of the outputs and activate them; -Scattare Photosif there are equipped with camera sensors; -Access To thehistorical events, and view any associated photos; -View The statusof all system zones and possibly enable them / disable them; -ViewInformation on the SIM and the GSM signal level of the center; Inthe list the main features in SMS mode: -View The status, arm anddisarm the individual plant areas; -View The status of the outputsand activate them; -View Information on the SIM; applicationworking with all Android versions later than 2.2 on bothsmartphones and tablets. Operating mode either vertically orhorizontally. It is necessary in a WAN link to the WEB mode and /or a GSM connection to the SMS mode for the connection from thealarm center side. Port router to open: 8002. To connect in tunnelmode the control panel must remain connected to the Internetpermanently and must be set to "Always connected mode". Theconnection from the app to the alarm center are brought via acentral operating Sicep MvsNET. The operations center Sicep MvsNETmust send an email to the smartphone that has an attachment to theconfiguration of the Tunnel mode. This attachment must be openedwith the app. firmware version required on the Central Unica:1.2.0.B121 or later. Default Pin: 12345 Keywords: Securpol, Group,Sicep, Security, Single, One, Central Antitheft, Plant, AlarmSystem, Insert, Control, Remote, Home Automation, GSM, GPRS, SMS.
My Cosmopol 1.14 APK
Sicep S.r.l.
My Cosmopol è l'applicazione di Cosmopol che consente agli utentila gestione da remoto delle centrali di allarme Unica e Onecomodamente dal proprio smartphone o tablet! Attraverso questaapplicazione, l’utente può controllare varie funzionalitàdell’impianto di allarme dipendenti dal modello di centraleinstallata. L'Applicazione prevede il controllo di un massimo di 4impianti in modalità WEB, Tunnel o SMS. In elenco le funzionalitàprincipali nella modalità WEB e Tunnel: -Visualizzare lo stato,inserire e disinserire le singole aree dell’impianto; -Verificarela presenza di guasti o anomalie; -Verificare la presenza ecancellare la memoria degli allarmi; -Visualizzare lo stato delleuscite ed attivarle; -Scattare foto nel caso vi siano sensoridotati di fotocamera; -Accedere allo storico degli eventi, evisualizzare eventuali foto associate; -Visualizzare lo stato dellezone del sistema e eventualmente abilitarle/disabilitarle;-Visualizzare informazioni sulla SIM e il livello del segnale GSMdella centrale; In elenco le funzionalità principali nella modalitàSMS: -Visualizzare lo stato, inserire e disinserire le singole areedell’impianto; -Visualizzare lo stato delle uscite ed attivarle;-Visualizzare informazioni sulla SIM; Applicazione funzionante contutte le versioni Android pari o successive alla 4.0 sia susmarthphone che su tablet. Modalità di funzionamento sia verticaleche orizzontale. Per la connessione dal lato centrale di allarme, ènecessario un collegamento in WAN per la modalità WEB e/o uncollegamento GSM per la modalità SMS. Porta router da aprire: 8002.Per la connessione in modalità Tunnel la centrale di allarme deverimanere collegata alla rete internet in modo permanente e deveessere impostata in modalità "Sempre Connesso". La connessione daapp verso la centrale di allarme avviene passando da una centraleoperativa Sicep MvsNET. La centrale operativa Sicep MvsNET deveinviare allo smartphone una email contenente un allegato per laconfigurazione della modalità Tunnel. Tale allegato deve essereaperto con la app. Versione firmware richiesta sulla centraleUnica: 1.2.0.B121 o successive. Pin di default: 12345 Parolechiave: Sicep, Sicurezza, Unica, One, Centrale, Antifurto, Sistema,Impianto, Allarme, Inserire, Controllo, Remoto, Domotica, GSM,GPRS, SMS. My Cosmopol is the application of Cosmopol that allowsusers to remotely control the Unica and One alarm control panelsfrom the comfort of their smartphone or tablet! Through thisapplication, the user can control various functions of the alarmsystem depending on the model of the installed unit. Theapplication provides for the control of up to 4 systems in WEB,Tunnel or SMS mode. In the list the main functionalities in WEB andTunnel mode: -View the status, enter and disarm the individualareas of the system; -Check for faults or anomalies; -Check thepresence and delete the alarm memory; -View the status of theoutputs and activate them; - Take pictures in case there aresensors equipped with a camera; - Access the event history, andview any associated photos; -View the status of the zones of thesystem and eventually enable / disable them; - View information onthe SIM and the GSM signal level of the control panel; The mainfeatures in the SMS mode are listed: -View the status, enter anddisarm the individual areas of the system; -View the status of theoutputs and activate them; - View information on the SIM;Application working with all Android versions equal to or laterthan 4.0 on both smartphones and tablets. Operating mode bothvertical and horizontal. For connection from the central alarmside, a WAN connection is required for WEB mode and / or a GSMconnection for SMS mode. Router port to open: 8002. To connect inTunnel mode, the alarm center must remain permanently connected tothe Internet and must be set in "Always Connected" mode. Theconnection from the app to the alarm center is via a Sicep MvsNEToperations center. The Sicep MvsNET operations center must send anemail to the smartphone containing an attachment for configuringthe Tunnel mode. This attachment must be opened with the app.Firmware version requested on the Unica control panel: 1.2.0.B121or later. Default pin: 12345 Keywords: Sicep, Security, Unique,One, Central, Anti-theft, System, System, Alarm, Enter, Control,Remote, Home automation, GSM, GPRS, SMS.
My Tertrais 1.14 APK
Sicep S.r.l.
My Tertrais est l'application de Tertrais qui permet auxutilisateurs de gérer à distance et confortablement de votresmartphone ou de votre tablette le centrales d'alarmes Unica etOne! Grâce à cette application, l'utilisateur peut contrôlerdiverses caractéristiques du système suivant le modèle installé decentrale d'alarmes. L'application permet de contrôler un maximum dequatre installations en mode Web ou SMS. Liste des fonctionnalitésde base en mode WEB : -Affichage du statut d'activation ou dedésactivation des différents domaines de l'installation ; -Contrôlede détection des défaillances ou des anomalies ; -Détection etsuppression de la présence d'alarmes en mémoire ; -Affichage etactivation du statut des outputs ; -Prise de photos si les capteurssont dotés d'appareils photo; -Accès à l'historique des événementset affichage des photos qui y sont associées; -Affichage du statutdes zones du système avec la possibilité de les activer /désactiver; -Affichage de l'information sur la carte SIM et duniveau du signal GSM de la centrale. Liste des fonctionnalités debase en mode SMS : -Affichage du statut d'activation ou dedésactivation des différents domaines de l'installation; -Affichageet activation du statut des outputs; -Affichage de l'informationsur la carte SIM. Application fonctionnant avec toutes les versionsAndroid 2.2 et ultérieures sur les smartphones et sur lestablettes. Mode de fonctionnement vertical et horizontal. Pour laconnexion à partir du panneau de contrôle des alarmes, uneconnexion Wan à l'internet en mode WEB et / ou un lien GSM en modeSMS est nécessaire. Port de routeur pour être ouvert: 8002 Versionde firmware sur la Centrale Unica : 1.2.0.B121 ou versionultérieure. Pin par défaut : 12345 My Tertrais is the Tertrais appthat allows users to remotely and comfortably manage the Unica andOne control panels from your smartphone or tablet! With thisapplication, the user can control various features of the systemaccording to the installed model of alarm center. The applicationallows you to control up to four installations in Web or SMS mode.List of basic functionalities in WEB mode: -Display of theactivation or deactivation status of the different areas of theinstallation; -Control of detection of failures or anomalies;-Detection and suppression of the presence of alarms in memory;-Display and activation of the status of the outputs; - Take photosif the sensors are equipped with cameras; -Access to the history ofevents and display associated photos; - Display of the status ofthe zones of the system with the possibility of activating /deactivating them; -Displaying information on the SIM card and theGSM signal level of the control panel. List of basic features inSMS mode: -Display of the activation or deactivation status of thedifferent areas of the installation; -Display and activation of thestatus of the outputs; -Displaying information on the SIM card.Application running with all Android 2.2 and later versions onsmartphones and tablets. Vertical and horizontal operation mode.For connection from the alarm control panel, a Wan connection tothe internet in WEB mode and / or a GSM link in SMS mode isrequired. Router port to be opened: 8002 Firmware version on theUnica Central Unit: 1.2.0.B121 or later. Default Pin: 12345
Alma Roma 1.12 APK
Sicep S.r.l.
Alma Roma è l'applicazione di ALMA ROMA S.r.l. che consente agliutenti la gestione da remoto delle centrali di allarme Unica, Dogmae One comodamente dal proprio smartphone o tablet! Attraversoquesta applicazione, l’utente può controllare varie funzionalitàdell’impianto di allarme dipendenti dal modello di centraleinstallata. L'Applicazione prevede il controllo di impianti inmodalità WEB, Cloud, Tunnel o SMS. In elenco le funzionalitàprincipali nella modalità WEB, Cloud e Tunnel: -Visualizzare lostato, inserire e disinserire le singole aree dell’impianto;-Verificare la presenza di guasti o anomalie; -Verificare lapresenza e cancellare la memoria degli allarmi; -Visualizzare lostato delle uscite ed attivarle; -Scattare foto nel caso vi sianosensori dotati di fotocamera; -Accedere allo storico degli eventi,e visualizzare eventuali foto associate; -Visualizzare lo statodelle zone del sistema e eventualmente abilitarle/disabilitarle;-Visualizzare informazioni sulla SIM e il livello del segnale GSMdella centrale; In elenco le funzionalità principali nella modalitàSMS: -Visualizzare lo stato, inserire e disinserire le singole areedell’impianto; -Visualizzare lo stato delle uscite ed attivarle;-Visualizzare informazioni sulla SIM; Applicazione funzionante contutte le versioni Android successive alla 2.2 sia su smarthphoneche su tablet. Modalità di funzionamento sia verticale cheorizzontale. Per la connessione dal lato centrale di allarme, ènecessario un collegamento in WAN per la modalità WEB e/o uncollegamento GSM per la modalità SMS. Porta router da aprire: 8002(Solo per Web). Per la connessione in modalità Tunnel la centraledi allarme deve rimanere collegata alla rete internet in modopermanente e deve essere impostata in modalità "Sempre Connesso".La connessione da app verso la centrale di allarme avviene passandoda una centrale operativa Sicep MvsNET. La centrale operativa SicepMvsNET deve inviare allo smartphone una email contenente unallegato per la configurazione della modalità Tunnel. Tale allegatodeve essere aperto con la app. Versione firmware richiesta sullacentrale Unica: 1.2.0.B121 o successive. Pin di default: 12345 AlmaRoma is the application of ALMA ROMA S.r.l. that allows users toremotely manage the Unica, Dogma and One alarm centers from thecomfort of their smartphone or tablet! Through this application,the user can control various functions of the alarm systemdepending on the model of installed control panel. The Applicationrequires the control of systems in WEB, Cloud, Tunnel or SMS mode.The main features in the WEB, Cloud and Tunnel modes are listed: -View the status, switch on and off the individual areas of thesystem; - Check for faults or anomalies; - Check the presence anddelete the memory of the alarms; - View the status of the outputsand activate them; -Take pictures in case there are camera sensors;- Access the event history, and view any associated photos; - Viewthe status of the system zones and possibly enable / disable them;- Display information on the SIM and the GSM signal level of thecontrol panel; The main features in SMS mode are listed: - View thestatus, switch on and off the individual areas of the system; -View the status of the outputs and activate them; - Viewinformation on the SIM; Application running on all Android versionsafter 2.2 on both smartphones and tablets. Operating modes bothvertical and horizontal. For connection from the central alarmside, a WAN connection is required for WEB mode and / or a GSMconnection for SMS mode. Router port to open: 8002 (Web only). Forthe connection in Tunnel mode the alarm control panel must remainpermanently connected to the internet and must be set in "AlwaysConnected" mode. The connection from the app to the alarm controlpanel is via a Sicep MvsNET operations center. The Sicep MvsNEToperations center must send the smartphone an email containing anattachment for configuring the Tunnel mode. This attachment must beopened with the app. Firmware version required on the Unica controlpanel: 1.2.0.B121 or later. Default Pin: 12345
MY SENTINEL 1.16 APK
Sicep S.r.l.
My Sentinel è l'applicazione del CORPO GUARDIE GIURATE che consenteagli utenti la gestione da remoto delle centrali di allarme Unica,Dogma e One comodamente dal proprio smartphone o tablet! Attraversoquesta applicazione, l’utente può controllare varie funzionalitàdell’impianto di allarme dipendenti dal modello di centraleinstallata. L'Applicazione prevede il controllo di impianti inmodalità Cloud, WEB, Tunnel o SMS. In elenco le funzionalitàprincipali nella modalità Cloud, WEB e Tunnel: -Visualizzare lostato, inserire e disinserire le singole aree dell’impianto;-Verificare la presenza di guasti o anomalie; -Verificare lapresenza e cancellare la memoria degli allarmi; -Visualizzare lostato delle uscite ed attivarle; -Scattare foto nel caso vi sianosensori dotati di fotocamera; -Accedere allo storico degli eventi,e visualizzare eventuali foto associate; -Visualizzare lo statodelle zone del sistema e eventualmente abilitarle/disabilitarle;-Visualizzare informazioni sulla SIM e il livello del segnale GSMdella centrale; In elenco le funzionalità principali nella modalitàSMS: -Visualizzare lo stato, inserire e disinserire le singole areedell’impianto; -Visualizzare lo stato delle uscite ed attivarle;-Visualizzare informazioni sulla SIM; Applicazione funzionante contutte le versioni Android successive alla 4.0 sia su smarthphoneche su tablet. Modalità di funzionamento sia verticale cheorizzontale. Per la connessione dal lato centrale di allarme, ènecessario un collegamento in WAN per la modalità WEB e/o uncollegamento GSM per la modalità SMS. Porta router da aprire: 8002.Per la connessione Cloud non è necessario aprire nessuna porta. Perla connessione in modalità Tunnel la centrale di allarme deverimanere collegata alla rete internet in modo permanente e deveessere impostata in modalità "Sempre Connesso". La connessione daapp verso la centrale di allarme avviene passando da una centraleoperativa Sicep MvsNET. La centrale operativa Sicep MvsNET deveinviare allo smartphone una email contenente un allegato per laconfigurazione della modalità Tunnel. Tale allegato deve essereaperto con la app. Versione firmware richiesta sulla centraleUnica: 1.2.0.B121 o successive. Pin di default: 12345 Parolechiave: Sicep, Sicurezza, Unica, One, Centrale, Antifurto, Sistema,Impianto, Allarme, Inserire, Controllo, Remoto, Domotica, GSM,GPRS, SMS. My Sentinel is the SWEET BODY application that allowsusers to remotely manage Unica, Dogma and One alarm centers fromthe comfort of their smartphone or tablet! Through thisapplication, the user can control various functions of the alarmsystem depending on the model of installed control panel. TheApplication involves the control of systems in Cloud, WEB, Tunnelor SMS mode. The main features in Cloud, WEB and Tunnel mode arelisted: - View the status, switch on and off the individual areasof the system; - Check for faults or anomalies; - Check thepresence and delete the memory of the alarms; - View the status ofthe outputs and activate them; -Take pictures in case there arecamera sensors; - Access the event history, and view any associatedphotos; - View the status of the system zones and possibly enable /disable them; - Display information on the SIM and the GSM signallevel of the control panel; The main features in SMS mode arelisted: - View the status, switch on and off the individual areasof the system; - View the status of the outputs and activate them;- View information on the SIM; Application running with allpost-4.0 Android versions both on smartphones and tablets.Operating modes both vertical and horizontal. For connection fromthe central alarm side, a WAN connection is required for WEB modeand / or a GSM connection for SMS mode. Router port to open: 8002.No port is required for the Cloud connection. For the connection inTunnel mode the alarm control panel must remain permanentlyconnected to the internet and must be set in "Always Connected"mode. The connection from the app to the alarm control panel is viaa Sicep MvsNET operations center. The Sicep MvsNET operationscenter must send the smartphone an email containing an attachmentfor configuring the Tunnel mode. This attachment must be openedwith the app. Firmware version required on the Unica control panel:1.2.0.B121 or later. Default Pin: 12345 Keywords: Sicep, Security,Single, One, Central, Anti-theft, System, System, Alarm, Insert,Control, Remote, Home Automation, GSM, GPRS, SMS.
Loading...