By Access Control Manager app you can manage access cards thatcanopen the door of your home or building. It is necessary to havetheGolmar N4502 / NFC access kit or the EL4502 / NFC RF accessmodule.You can create new installation and then edit the list ofcardsthat can access, also relays that activates each card the samewayyou can manage the opening times of the relays R1, R2, R3andtransistor output 12 VDC panic P. To operate the mobile deviceyoumust have NFC on your device and Android version 4.4 orhigher.Edit installation: Enable and disable Master and Residentcards tomanage access to your home or building. - Through Mastercards youcan enable / disable Resident Card and Installation on theplate. -By Resident cards you can access your home orbuilding.Communication with the board: It may transmit device datato theplate by NFC, if your device implements, bidirectionally. Youcansend data to the plate, receiving plate data and update anexistinginstallation on the device. Ticketing: You will be able toregistercards to define a number of accesses. Once you haveaccessed withcard access number configured it becomes unusableirreversibly.Visiting card: Store data such as name and / orcontact phonenumber on the card. Link plate: You need to link theplate with thedevice to exchange data with it. - First enable thecard link onthe plate you want to manage. - Then press the optionon the deviceand approaching the card to the device. - Finallyapproach the linkcard to the plate, thus the device and the platewill be linked.OpenGo Open the door of your home or building byOpenGo. Active anaccess card and open the door of your house orbuilding.