O Aplicativo começa detalhando uma sapata para um pilar de 20cmpor 40 cm com carga de 100 kN.
A tela das condições permite modificar:
- carga (inicialmente igual a 100 kN);
- resistência do concreto (inicialmente igual a 2,0 kN/cm2,20MPa);
- resistência do aço (inicialmente igual a 50,0 kN/cm2,CA50);
- coeficiente de segurança majorador dos esforços(inicialmenteigual a 1,4);
- coeficiente de segurança minorador da resistência doconcreto(inicialmente igual a 1,4);
- coeficiente de segurança minorador da resistência doaço(inicialmente igual a 1,15);
- relação Lado Y / Lado X (inicialmente igual a 1,0 -sapataquadrada);
- tensão admissível do terreno (inicialmente igual a 20 N/cm2).
A tela das dimensões permite modificar:
- tamanho menor do pilar (inicialmente igual a 20 cm);
- tamanho maior do pilar (inicialmente igual a 40 cm);
- cobrimento (inicialmente igual a 5.0 cm).
Obs.: Aplicativo de demonstração. Conferir os cálculos antesdeusar!
The application begins detailing a shoe to a pillar of 20 cmby40 cm with a load of 100 kN.
The screen allows you to modify the conditions:
- Load (initially equal to 100 kN);
- Strength of concrete (initially equal to 2.0 kN / cm2,20MPa);
- Strength of steel (initially equal to 50.0 kN / cm2, CA50);
- Majorador safety factor of efforts (initially equal to1.4);
- Minorador safety coefficient of resistance of theconcrete(initially equal to 1.4);
- Minorador safety factor of the strength of steel (initiallyequalto 1.15);
- Respect Side Y / X side (initially equal to 1.0 -Squareshoe);
- Allowable stress of the land (initially equal to 20 N / cm2).
The dimensions of the screen allows you to change:
- Smaller size pillar (initially equal to 20 cm);
- Large size of the pillar (initially equal to 40 cm);
- Coatings (initially equal to 5.0 cm).
Obs .: demo application. Check calculations before use!