MDCode التطبيقات
GCodePrintr lite - 3D Printing 1.41
Control your 3D printer from your favourite Android device andsendgcodes to the printer. This is a version of GcodePrintr withareduced feature set. it allows you to control a real 3Dprinterusing USB-OTG cable but without any visualization andsimulation ofthe print. ******************** It is recommended toinstall thefull version (GCodePrintr) and only use this liteversion if thevisualization part causes problems. Mainly on deviceswhich are notpowerful enough to do printing and visualization atthe same time.******************* This version offers full printingsupport(without any visualization of the print) This isbasicallyGcodePrintr without the Simulation & Visualizationpart.IMPORTANT: Before buying this version make sure that yourprinterconnection works with the free version. PrintFeatures---------------------- Connect to a printer using USB OTGCable.IMPORTANT: Before buying this version make sure that yourprinterworks with the free version. Control the printer using thePrinterControl Panel (X,Y,Z Movement, Extruder, Heat, Fan,..) Loadyourown gcode file and start a real print from your Android device.Ithas a build-in network receiver which is enabled bylong-pressingthe "load" button. Once enabled it listens for gcodefiles in port53232 . Use Gcode Simulator for PC to send files fromPC directlyto your Android tablet to print them. Feedback byconsole basedoutput. Does not include simulation and visualization,please buythe GCode Simulator & Printer App if this is needed.Remarksand Limitations -----------------------------------Developed forreprap printers but should work with other printers(e.g.ultimaker) as well, tested with Slic3r and SkeinforgegeneratedGcodes. To load files locally from the device, sd-card ordropboxyou need to install a Android file manager (e.g. ES FileExplorer)Only absolut positioning is supported. Gcodes withrelativepositioning will likely fail. Loading large Gcode files(multipleMegaByte) might fail, depending on the available memory ofthedevice. Printer Control Feature requires a android devicewithUSB-OTG support and a USB-OTG cable. Before buying thisversionmake sure that your printer works with the free version.
GCodeTouch3D *Beta* 1.03
Paint the first layer with your fingers and print it out on your3Dprinter (live). You can paint one layer and let the Appaddadditional layers on top to make the object higher, Let yourkidspaint and print something ! (Be carefull, never let your kidsalonewith the 3D printer) Current version does only supportaddingadditional layers with the same geometry, but further versionwilladd transformation options (e.g. rotate layer, shinklayer,..)*Works with many 3D printers (like Reprap, PrintrBot,Ultimaker,Makibox, Solidoodle, Robot3d, Multec Multirap,..). *Workswithmultiple firmwares (Sprinter,Marlin,Smoothie,..) Help: 1) Pressthestart button and wait until it has connected and theextruderreached the target temperature 2) Paint the first layerwith yourfingers. You can choose between single wall, perimeters orinfill(BETA Notice: Perimeter and Infill need to be improved) 3)Once thefirst layer is painted, click "clone layer" to add furtherlayerswith the same geometry. Painting with the fingers is onlypossibleon the first layer 4) press restart to start a new print(twice todisconnect) This App is based on GCodePrintr &GCodeSimulatorApp. Before buying this App you should ensure thatyour printerconnection works with GCodeSimulator ! Important: Thisis a betaversion, in case of any problem please DO NOT use the Appreviewfeedback. Instead please send an email (gcode@dietzm.de) orjointhe GCodePrintrCommunity.https://plus.google.com/u/0/communities/116436892101925074251