1.1 / September 21, 2014
(3.8/5) (17)
Loading...

Description

This app is an android version AVR downloadand uploader.
Current version supports only usbasp programmer.
I has a plan to support other programmer in the future release.

Supported features
- connect/disconnect to the programmer device using the usbport.
- load a hex file.
- save a flash and EEPROM data into the file.
- read and write a flash memory.
- read and write a EEPROM memory
- chip erase.
- read a fuse bits.
- write a fuse bits.
- show the target board mcu Information.

App Information AVR DUD Lite

  • App Name
    AVR DUD Lite
  • Package Name
    com.oneman.tools.avrdud
  • Updated
    September 21, 2014
  • File Size
    801k
  • Requires Android
    Android 3.2 and up
  • Version
    1.1
  • Developer
    hosun lim
  • Installs
    1,000 - 5,000
  • Price
    Free
  • Category
    Tools
  • Developer
    Email [email protected]
    inspace, room number 501, 96, Gajeongbuk-ro, Yuseong-gu, 305-343, Daejeon, Korea
  • Google Play Link

hosun lim Show More...

USB Serial Terminal Lite 1.5 APK
hosun lim
Smart phones serial terminal program. USB equipment using SiliconLaboratories CP210X, FTDI FT232 and Prolific PL2303, CDC/ACM UARTto USB Bridge chips can be used to connect to your smartphone.Zigbee Chip TI CC2531(USB-Enabled SOC Solution for 2.4-GHzIEEE 802.15.4 and ZigBee App) can be used also.Provides the samefunctionality and the PC for serial communication terminal-Supported UART to USB Bridge chip: Silicon Laboratories(CP210X),FTDI(FT232), Prolific(PL2303)- ARDUINO Support(FTDI, CDC/ACM)-Supported smart phones: USB host support smart phones (Samsunggalaxy2/galaxy 3/galaxy note / galaxy note2/Vega racer R3)-Supported Android version: Android version 3.1 (API Level 12) or1.Quick Start1) Please use the OTG cable to connect the usb device onyour smart phone.2) smart phone detect usb device, and then askswhether to run.Click OK to run the App.3) Click the Settings button(wrench icon) of upper right corner in order to set serialcommunication.4) Click the Save button.5) Click the Connect button(phone icon) of upper right corner in order to connect to thedevice.2. Main Activity- ASCII: Print received data as a asciistring.- HEX: Print received data as a hexadecimal string.- BIN:Print received data as a binary string.- Connect Button(Phoneicon):, connect to USB device. After connection this icon changedto close icon.- Settings Button(Wrench icon): Serial communicationsetting window will open- Upper(RX) CR, LF: Line separatorconfiguration. process device to local system line separatorconversion for received data before print text area- Modem statusbuttons: show CTS, DSR, CD, RI pin status- USB device description:USB device’s description window will open- Clear received data::Trash icon, clear all received data in text area- Received datatext area: print received data- DTR button: control modem DTRstatus- RTS button: control modem RTS status- Lower(TX) CR/LF:Append line separator characters to transfer data- Transfer(TX)Text input field: Enter the data(string, decimal, hexadecimal,binary) you want to transfer.Transfer data is entered as a stringby default.Binary data is entered as shown below, you can enter inhex or binary or decimalDecimal: @ +숫자 3-digit(0~255) ex) CR:@013Hexadecimal: # + 2-digit hex, ex) CR: #0DBinary: & +8-digit binary, ex) CR: &00001101※ Escape @, #, &: inserttwice in succession in order to send @, #, &ex) @@, ##,&&- Send Button(Right arrow icon): Transfer input data toUSB device- Macro buttons 1 ~ 7: Set macro(had entered thefrequently used data in advance) to transfer text field- Macro EditButton(Pencil icon): Macro edit window will open 3. Menu- Settings:Serial Communication Settings window will open.- USB Descriptions:USB equipment specification window will open.- Edit Macro: Themacro edit window will open.- ASCII Code Table: ASCII code tablelookup and input window will open. select ASCII code in order toinput ASCII Codes- Help: Help4. Other features (view)- Serialcommunication settings: Baud rate, Data bits, Parity, Stop bits,Handshaking Mode setting supported. Select enable file logging forlogging received data in external storage path "[External StorageRoot]/USBTerminal/YYMMDD_hhmmss.log".- Macro edit: edit transferdata macro that frequently used. Macros can register up to seven.-ASCII table: ASCII Code table. ASCII code inserted to text fieldWhen you select a code, and the window is closed, the insertedcodes appended to tx text field5. FAQQ: Why my smart phone detectusb device?A: Smartphones make sure it supports the USB Host.Inaddition, the Android version 3.1 (API Level 12) from the USB Hostsupport.Occasionally on the smartphone does not recognize USBdevices (eg Galaxy Note 1). Smartphone otg cable to connect toleave only the part that is connected to the equipment byunplugging and re-connect if you recognize that this case is.
USB Serial Control Panel Lite 1.3 APK
hosun lim
Smart phones serial control panel program. USB equipment usingSilicon Laboratories CP210X, FTDI FT232 and Prolific PL2303,CDC/ACM UART to USB Bridge chips can be used to connect to yoursmart phone.Zigbee Chip TI CC2531(USB-Enabled SOC Solution for2.4-GHz IEEE 802.15.4 and ZigBee App) can be used also.You can addfrequently used functions as buttons, and then click the controlbutton to transmit preconfigured data.- Supported chip: SiliconLaboratories(CP210X), FTDI(FT232), Prolific(PL2303)- ARDUINOSupport(FTDI, CDC/ACM)- Supported phones: USB host support smartphones (Samsung galaxy2/galaxy 3/galaxy note / galaxy note2/Vegaracer R3)- Supported Android version: Android version 3.1 (APILevel 12)0. Quick Start1) Please use the OTG cable to connect theusb device on your smart phone.2) Smart phone detect usb device,and then asks whether to run. Click OK to run the App.3) Click the"Settings" button (wrench icon) of upper right corner in order toset serial communication.4) Click the "Save" button.5) Click the"Connect button(phone icon)" of upper right corner in order toconnect to the device.6) Click "add conrol button"(Plus icon) intoolbar, and then input name and content to send7) Click the Savebutton8) Control button will be added in the panel.9) Click thebutton on the control panel, app will transfer the data(content) tothe device.10) App will show the response from USB device at thereceive text view.2. Control button contentBinary data is enteredas shown below, you can enter in hex or binary or decimal- Decimal:@ +숫자 3-digit(0~255) ex) CR: @013- Hex: # + 2-digit hex, ex) CR:#0D- Binary: & + 8-digit binary, ex) CR: &00001101 ※[email protected], #, &: insert twice in succession in order to send @, #,& Delay between the transmitted data can be entered.- insertdelay(ms) in send data between "<%" and "%>" ex) up<%sleep:1000 %>down<% sleep:2000 %>left<% sleep:3000%>right 1) send "up" 2) sleep 1 second 3) send "down" 4) sleep 2second 5) send "left" 6) sleep 3 second 7) send "right"
USB Serial Terminal Pro 2.1 APK
hosun lim
Smart phones serial terminal program. USB equipment using SilLabCP210X, FTDI FT232 and Prolific PL2303, CDC/ACM UART to USB Bridgechips can be used to connect to your smart phone.Zigbee Chip TICC2531 can be used also. Provides the same functionality and the PCfor serial communication terminal- Supported chip: SiliconLaboratories(CP210X), FTDI(FT232), Prolific(PL2303)- ARDUINOSupport(FTDI, CDC/ACM)- Supported phones: USB host support smartphones (Samsung galaxy2/galaxy 3/galaxy note / galaxy note2/Vegaracer R3)- Supported Android version: Android version 3.1 (APILevel 12)0. Quick Start1) Please use the OTG cable to connect theusb device on your smart phone.2) smart phone detect usb device,and then asks whether to run. Click OK to run the App.3) Click theSettings button (wrench icon) of upper right corner in order to setserial communication.4) Click the Save button.5) Click the Connectbutton (phone icon) of upper right corner in order to connect tothe device.1. Main UI- ASCII: Print received data as a asciistring.- HEX: Print received data as a hexadecimal string.- BIN:Print received data as a binary string.- Connect Button(Phoneicon):, connect to USB device. After connection this icon changedto close icon.- Settings Button(Wrench icon): Serial communicationsetting window will open- Upper(RX) CR, LF: Line separatorconfiguration. process device to local system line separatorconversion for received data before print text area- Modem statusbuttons: show CTS, DSR, CD, RI pin status- USB device description:USB device’s description window will open- Clear received data::Trash icon, clear all received data in text area- Received datatext area: print received data- DTR/RTS button: control modemDTR/RTS status- Lower(TX) CR/LF: Append line separator charactersto transfer data- Transfer(TX) Text input field: Enter thedata(string, decimal, hexadecimal, binary) you want totransfer.Transfer data is entered as a string by default.Binarydata is entered as shown below, you can enter in hex or binary ordecimalDecimal: @ +숫자 3-digit(0~255) ex) CR: @013Hex: # + 2-digithex, ex) CR: #0DBinary: & + 8-digit binary, ex) CR:&00001101※Escape @, #, &: insert twice in succession inorder to send @, #, &- Send Button(Right arrow icon): Transferinput data to USB device- Macro buttons 1 ~ 7: Set macro(hadentered the frequently used data in advance) to transfer textfield- Macro Edit Button(Pencil icon): Macro edit window will open2. Menu- Serial communication settings: Baud rate, Data bits,Parity, Stop bits, Handshaking Mode setting supported. Selectenable file logging for logging received data in the externalstorage path "[External StorageRoot]/USBTerminal/RAW_YYMMDD_hhmmss.log".- USB Descriptions: USBequipment specification window will open.- Macro edit: edittransfer data macro that frequently used. Macros can register up toseven.- ASCII table: ASCII Code table. ASCII code inserted to textfield When you select a code, and the window is closed, theinserted codes appended to tx text field- Send Break: send longbreak- Save Console Log: save current console content to theexternal storage path "[External StorageRoot]/USBTerminal/CONSOLE_YYMMDD_hhmmss.log".- Share Log File:share a saved log file to bluetooth, cloud services, email, ...3.FAQQ: Why my smart phone detect usb device?A: Smartphones make sureit supports the USB Host.In addition, the Android version 3.1 (APILevel 12) from the USB Host support.Occasionally on the smartphonedoes not recognize USB devices (eg Galaxy Note 1). Smartphone otgcable to connect to leave only the part that is connected to theequipment by unplugging and re-connect if you recognize that thiscase is.Q: After installing your app, my another app that uses USBOTG stopped working.A: Android won't re-recognize the deviceattached unless the OTG cable is physically removed andre-attached. (Thanks to Aki Niimura)
USB Serial Control Panel Pro 1.5 APK
hosun lim
Smart phones serial control panel program. USB equipment usingSilicon Laboratories CP210X, FTDI FT232 and Prolific PL2303,CDC/ACM UART to USB Bridge chips can be used to connect to yoursmart phone.Zigbee Chip TI CC2531(USB-Enabled SOC Solution for2.4-GHz IEEE 802.15.4 and ZigBee App) can be used also.You can addfrequently used functions as buttons, and then click the controlbutton to transmit preconfigured data.- Supported chip: SiliconLaboratories(CP210X), FTDI(FT232), Prolific(PL2303)- ARDUINOSupport(FTDI, CDC/ACM)- Supported phones: USB host support smartphones (Samsung galaxy2/galaxy 3/galaxy note / galaxy note2/Vegaracer R3)- Supported Android version: Android version 3.1 (APILevel 12)0. Quick Start1) Please use the OTG cable to connect theusb device on your smart phone.2) Smart phone detect usb device,and then asks whether to run. Click OK to run the App.3) Click the"Settings" button (wrench icon) of upper right corner in order toset serial communication.4) Click the "Save" button.5) Click the"Connect button(phone icon)" of upper right corner in order toconnect to the device.6) Click "add control button"(Plus icon) intoolbar, and then input name and content to send7) Click the Savebutton8) Control button will be added in the panel.9) Click thebutton on the control panel, app will transfer the data(content) tothe device.10) App will show the response from USB device at thereceive text view.2. Control button contentBinary data is enteredas shown below, you can enter in hex or binary or decimal- Decimal:@ +숫자 3-digit(0~255) ex) CR: @013- Hex: # + 2-digit hex, ex) CR:#0D- Binary: & + 8-digit binary, ex) CR: &00001101 ※[email protected], #, &: insert twice in succession in order to send @, #,& Delay between the transmitted data can be entered.- insertdelay(ms) in send data between "<%" and "%>" ex) up<%sleep:1000 %>down<% sleep:2000 %>left<% sleep:3000%>right 1) send "up" 2) sleep 1 second 3) send "down" 4) sleep 2second 5) send "left" 6) sleep 3 second 7) send "right"
AVR DUD Lite 1.1 APK
hosun lim
This app is an android version AVR downloadand uploader.Current version supports only usbasp programmer.I has a plan to support other programmer in the future release.Supported features- connect/disconnect to the programmer device using the usbport.- load a hex file.- save a flash and EEPROM data into the file.- read and write a flash memory.- read and write a EEPROM memory- chip erase.- read a fuse bits.- write a fuse bits.- show the target board mcu Information.
DB Scanner 1.1 APK
hosun lim
This application searches the database from the local network.(CClass).WiFi must be turned on.- MySQL Database scan
Developer Gadget 1.3 APK
hosun lim
This app provides a gadget fordevelopers.Necessary tools will be added in future.- ASCII Code Table- Android ID- Java Environment- System Information- Shell Command Executor- File ExplorerOther functions(Copy/Cut/Paste...) will be developed as soon aspossible.- SAMBA Host/File explorer (list only)Other functions(Copy/Cut/Paste...) will be developed as soon aspossible.- Whois- Sensor Explorer
USB Device Descriptors 1.0 APK
hosun lim
Enumerate the USB devices connected to the smart phone, and provideusb device descriptors of selected USB equipment.By Using App'sbuilt-in VID/PID database, provide the USB equipment's manufacturerand product name.
Loading...