HLCSDev Apps

Loading...
Стропила. Расчет на прочность. DEMO 1.7
HLCSDev
В приложении рассчитываются несущие конструкции крыши(стропила).Расчет выполняется в соответствии с нормами:- СП64.13330.2011 (СНиП II-25-80)- СП 20.13330.2011 (СНиП2.01.07-85)Стропила проверяются:- на прочность- на прогибЕстьвозможность выбора различных вариантов кровли, породы и сортовдревесины.Если Вы ведете строительство жилого дома, коттеджа илидачи, эта программа может оказаться весьма полезной.ОсобенностиDEMO-версии:- Пролет (L) можно задать не более 2000 ммThe appcalculates bearing roof construction (rafters).The calculation isperformed in accordance with:- SP 64.13330.2011 (SNP II-25-80)- SP20.13330.2011 (SNIP 2.01.07-85)Rafters are checked:- strength- ondeflectionThere is a choice of different variants of the roof,rocks and woods.If you are driving the construction of a dwellinghouse, cottage or villa, this program can be very useful.FeaturesDEMO-version:- Span (L) can be set not more than 2000 mm
Calculation of the reinforced concrete beam 2.0.2
HLCSDev
The app selects the cross-sectional area of the reinforcement ofthe reinforced concrete beam.There are 2 variants of calculation:1.Calculation of the ray.- hinged support;- the load is evenlydistributed.2. The calculation is arbitrary.- by the moment.Thechoice is made by strength in accordance with standards (SP52-101-2003).The number and diameter of the rods can be selectedusing the calculator on the calculation results page.
Стропила. Расчет на прочность 1.6
HLCSDev
В приложении рассчитываются несущие конструкции крыши(стропила).Расчет выполняется в соответствии с нормами:- СП64.13330.2011 (СНиП II-25-80)- СП 20.13330.2011 (СНиП2.01.07-85)Стропила проверяются:- на прочность- на прогибЕстьвозможность выбора различных вариантов кровли, породы и сортовдревесины.Если Вы ведете строительство жилого дома, коттеджа илидачи, эта программа может оказаться весьма полезной.The appcalculates bearing roof construction (rafters).The calculation isperformed in accordance with:- SP 64.13330.2011 (SNP II-25-80)- SP20.13330.2011 (SNIP 2.01.07-85)Rafters are checked:- strength- ondeflectionThere is a choice of different variants of the roof,rocks and woods.If you are driving the construction of a dwellinghouse, cottage or villa, this program can be very useful.
Metal Calculator. Steel Weight & Paint Area 1.5.2
HLCSDev
Metal calculator calculates the mass and the surface area of thesteel rolled metal. Two calculation modes are implemented: 1.Calculation of the mass of the steel profile for a given length; 2.Calculation of the color area of the steel profile for a givenmass. Everything is reduced to a table with the definition of thetotal values of weight and area of color. Calculation of the weightof steel is available in metric and British units. The results ofcalculations can be saved. In the calculator, you must select ametal profile from the range and specify the length (or mass). Thecalculation results will be: - weight of the selected steelprofile; - the amount of paint or other protective coatingrequired. those. External area of color; - the total mass of steeland the surface area of the entire selected metal. The desiredprofile is selected from the list or its sizes are set manually.List of available metal profiles: - I beam; - Channel; - Angle; - TSection; - Flat Bar; - Round Tube; - Square Tube; - RectangularTube; - Round Bar; - Square Bar; - Hexahedron.
Calculation of the reinforced concrete beam. PRO 1.9.1
HLCSDev
This construction calculator selects thecross-sectional area of ​​the reinforcement of the reinforcedconcrete beam.The support of the beam is articulated.The load is uniformly distributed.The calculation is carried out according to the first group oflimit states (in strength) in accordance with construction normsand rules: SP 52-101-2003 and SNIP 52-01-2003.Concrete: B15-B60.The range of reinforcement: А240, А300, А400, А500, B500.On the page with calculation results there is a convenientcalculator for selecting the diameter and number of reinforcingbars by the cross-sectional area.If you are building a residential house, cottage or villa, thisapplication of calculating a reinforced concrete beam can be veryuseful.
Wooden beam. Calculation of strength 1.5.0
HLCSDev
The application calculates the wooden beams of the floor or thecovering for strength and deflection according to building codesand norms (SP 64.13330.2011).Two variants of calculation arerealized:- floor beam;- free beam.For calculation, you must specifythe initial data, such as:1. The load is useful.The standard valuesare given in SP 20.13330.2011 (Loads and effects), Table 8.3.Forexample, for living quarters it is 150 kg / m2.2. Load from thefloor.It is necessary to specify the composition (pie) of thefloor, i.e. Materials and their thickness. If there are wooden logson the beams, then the load from their weight can be taken intoaccount.You can also set the load from the floor manually, if it isknown in advance.3. Step beams.4. Span.5. Wood species.6. Woodgrade7. Impregnation with flame retardants.Indicated for woodenbeams subjected to deep impregnation with fire retardants underpressure.8. Humidity of air.Humidity of air at which wooden beamswill be operated.9. Height of beam section (h).10. Beamcross-sectional width (b).The application is useful in the designand construction of an apartment house, cottage, villa, bath,utility rooms and other buildings.
Metal Calculator. Steel Weight & Paint Area. Full 1.3.1
HLCSDev
Metal calculator calculates the mass andthesurface area of the steel.Two calculation modes are implemented:1. Calculation of the mass of the steel profile for agivenlength;2. Calculation of the color area of the steel profile for agivenmass.Everything is reduced to a table with the definition of thetotalvalues of weight and area of color.In the calculator, you must select a metal profile from therangeand specify the length (or mass).The calculation results will be:- weight of the selected steel profile;- the amount of paint or other protective coating required(externalarea of color);- the total mass and the surface area of the selected metal.Calculation of the weight of steel and paint area is availableforthe following metal profiles according to GOST:- I Beam (GOST 26020-83)- Channel (GOST 8240-97)- Angle (GOST 8509-83, GOST 8510-86 *)- T Section (TU 14-2-685-86)- Flat Bar- Round Tube- Square Tube- Rectangular Tube- Round Bar- Square Bar.Calculation of the weight of steel and the paint area isavailablefor the following metal profiles according to ASTM:- I Beam (ASTM A6 / A6M-98)- Channel (ASTM)- Angle (ASTM)- T Section (ASTM)- Flat Bar- Round Tube- Square Tube- Rectangular Tube- Round Bar- Square Bar.Calculation of the weight of steel and the paint area isavailablefor the following metal profiles for the Indianassortment:- I Beam (Indian)- Channel (Indian)- Angle (Indian)- T Section (Indian)- Flat Bar- Round Tube- Square Tube- Rectangular Tube- Round Bar- Square Bar.Calculation of the weight of steel is available in metricandimperial units.
Notepad Notes 1.8.4.1
HLCSDev
Notepad for notes. The main features of the notepad: - Creatingcustom folders in notebook; - Adding an unlimited number of notesto the notepad; - Editing notes in the notepad; - Removing notesfrom the notepad; - Export the selected note from notebook to atext file; - Setting a password for individual notes; -Highlighting of notes by color; - Sort the list of notes in thenotebook; - Colored themes of the notebook; - Changing the fontsize in the note window; - Highlighting URL links, with the abilityto navigate through them; - Autosave. Premium version of thenotepad: - Backup of all notes; - Restoring all the notes from thebackup; - No ads.
Scheduler. Task list. Reminders 1.0.6
HLCSDev
- Intuitive and easy interface - Drawing up of to-do lists andtasks - Set the time and date of the reminder in the calendar -Separate tabs for tasks for today, tomorrow, for choice and for allbusiness - Separation of tasks into planned and completed ones