InfoSofty Apps

Loading...
QUIZ Capitales 1.1
InfoSofty
Un Quiz sympa pour tester vos connaissancesengéographie et vous aider à mémoriser facilement les capitalesdesdifférent pays.A fun quiz to testyourknowledge of geography and help you easily memorize thecapitals ofdifferent countries.
Dish Install, Pointer & Align 3.2
InfoSofty
Easy positioning and installation of your dish antenna withaccurate satellite display: Dish alignment, pointing andInstallation has always been a complicated task, especially if youdo not have a clue. That is why I posted this application that willsimplify this task and allow you to install and align your antennaor satellite dish without the need to call a specialist. SatCatcheris a satellite finder and dish pointer, it allows you to orientyour antenna to any satellite. Using augmented reality, thisapplication displays the target satellite in space to better choosethe location of your antenna or satellite dish and ensure theabsence of any obstacle (wall, tree ...). SatCatcher also uses yourphone GPS to show your location on a map and shows the direction ofthe satellite from your position. The compass accompanied by a beeplets you orient your antenna or satellite dish following theacceleration of beeps or the arrow of the compass. Theaccelerometer is used to verify that the holder of your antenna isvertical. The antenna or satellite dish adjustment steps: 1- choosea satellite and authorize geolocation to determine the direction ofthe antenna orientation. 2- Show satellite in augmented realitywith your camera and make sure there are no obstacles and validatethe location of your antenna. 3. Check that the support of yourantenna is vertical. 4. Calculate the polarization and adjust therotation of the LNB (the head of your antenna) 5. Set the elevation6- Search orientation with visual and sound assistant 7- Fineadjustments. For the good functioning of the application,SatCatcher will need the camera, compass, gyroscope, accelerometerand the GPS of your smartphone. tips: - If your smartphone does nothave GPS, you can manually move the "marker" on the card until itpoints your exact location. Use zoom for more detail. - The compassis very important to adjust your dish, but if your smartphone doesnot have one, you can still use the application. In this case, itwill help you to find clues and marks on the map from yourlocation. It also allows you to calculate the orientation. Than youcan use a manual compass to get a good orientation. - Do nothesitate to recalibrate the compass and avoid too close to theantenna arm, because it is sensitive to metallic elements. Try toplace your smartphone where there is less magnetic interference.SatCatcher Free is the lite version of SatCatcher. Augmentedreality and compass orientation are only available in the fullversion here:https://play.google.com/store/apps/details?id=com.InfoSoftyContact.SatCatcherEnContact : [email protected]
Installation Parabole, Réglage 3.2
InfoSofty
Pointage et installation facile de votre antenne parabole avec unaffichage précis des satellites : Le réglage d’une parabole atoujours été une tâche compliquée, surtout si vous ne disposezd’aucun indice. C’est pour cela que j’ai mis en ligne cetteapplication qui simplifiera cette tâche et vous permettra del’installer de votre parabole ou votre antenne sans avoir besoind’appeler un spécialiste. SatCatcher est une application qui vouspermet d’orienter votre parabole ou antenne vers n’importe quelsatellite. Grâce à la réalité augmentée, cette application affichele satellite cible dans l’espace afin de mieux choisirl’emplacement de votre parabole ou antenne et de s’assurer del’absence d’un éventuel obstacle (mur, arbre…). SatCatcher utiliseégalement le GPS pour afficher votre position sur une carte puisaffiche la direction du satellite depuis votre position. Laboussole accompagnée d’un bip sonore vous permet d’orienter votreantenne ou parabole en suivant l’accélération des bips ou la flèchede la boussole. L’accéléromètre est utilisé pour vérifier que lesupport de votre antenne ou parabole est bien vertical. Les étapesde réglage de l’antenne ou la parabole: 1- choisir un satellite etautoriser la géolocalisation pour calculer le sens d’orientation del’antenne ou la parabole. 2- Afficher le satellite en réalitéaugmentée grâce à votre caméra et s’assurer qu’il n’y a pasd’obstacle et valider l’emplacement de votre antenne ou parabole.3- Vérifier que le support de votre antenne ou parabole est bienvertical. 4- Calculer la polarisation et ajuster la rotation du LNB(la tête de votre antenne ou parabole) 5- Régler l’élévation 6-Rechercher l’orientation grâce à l’assistant visuel et sonore 7-Affiner les réglages. Pour le bon fonctionnement de l’application,SatCatcher aura besoin de la caméra, la boussole, le gyroscope,l’accéléromètre et le GPS de votre smartphone. Astuces : - Si votresmartphone ne possède pas de GPS, vous pouvez déplacer manuellementle « marker » sur la carte jusqu’à ce qu’il pointe votreposition exacte. Utilisez le zoom pour plus de précisions. - Laboussole est très importante pour régler votre parabole, mais sivotre smartphone n’en possède pas, vous pouvez quand même utiliserl’application. Dans ce cas, elle vous aidera à fixer des repèresgrâce à la direction affichée sur la carte depuis votre position.Elle vous permet également de calculer l’orientation. Il ne vousrestera plus qu’à utiliser une boussole manuelle pour vousorienter. - N’hésitez pas à recalibrer la boussole et éviter del’approchez trop près du bras de la parabole car elle est sensibleaux éléments métalliques. Essayer de placer votre smartphone la ouil y a le moins d’interférences magnétiques. Contact :[email protected] Pointing and easy installation ofyour satellite dish with an accurate display of satellites: Settinga parable has always been a complicated task, especially if you donot have a clue. That is why I posted this application that willsimplify this task and allow you to install your satellite dish orantenna without the need to call a specialist. SatCatcher is anapplication that allows you to orient your antenna or satellitedish to any satellite. Using augmented reality, this applicationdisplays the target satellite into space to better choose thelocation of your dish or antenna and ensure the absence of anyobstacle (wall, tree ...). SatCatcher also uses GPS to show yourlocation on a map and shows the direction of the satellite fromyour position. The compass accompanied by a beep lets you orientyour antenna or satellite dish, following the acceleration of beepsor the arrow of the compass. The accelerometer is used to verifythat the holder of your antenna or satellite dish is vertical. Theadjustment steps of the antenna or satellite dish: 1- choose asatellite and authorize geolocation to determine the direction oforientation of the antenna or satellite dish. 2- View satelliteactually increased with your camera and make sure there are noobstacles and validate the location of your antenna or parabola. 3.Check that the support of your antenna or satellite dish isvertical. 4. Calculate the polarization and adjust the rotation ofthe LNB (head to your antenna or satellite dish) 5. Set theelevation 6- Search guidance through visual and sound assistant 7-Filter settings. For the proper functioning of the application,SatCatcher will need the camera, compass, gyroscope, accelerometerand GPS from your smartphone. tips: - If your smartphone does nothave GPS, you can manually move the "marker" on the card until itpoints your exact location. Zoom in for more detail. - The compassis very important to adjust your dish, but if your smartphone doesnot have one, you can still use the application. In this case, itwill help set benchmarks with the direction on the map from yourlocation. It also allows you to calculate the orientation. It willdo more than use a manual compass for orientation. - Do nothesitate to recalibrate the compass and avoid too close to theparable of the arm because it is sensitive to metallic elements.Try to place your smartphone or the there is less magneticinterference. Contact: [email protected]
Dish Installation & Alignment 3.2
InfoSofty
Easy positioning and installation of your dish antenna withaccurate satellite display: Dish alignment, pointing andInstallation has always been a complicated task, especially if youdo not have a clue. That is why I posted this application that willsimplify this task and allow you to install and align your antennaor satellite dish without the need to call a specialist. SatCatcheris a satellite finder and dish pointer, it allows you to orientyour antenna to any satellite. Using augmented reality, thisapplication displays the target satellite in space to better choosethe location of your antenna or satellite dish and ensure theabsence of any obstacle (wall, tree ...). SatCatcher also uses yourphone GPS to show your location on a map and shows the direction ofthe satellite from your position. The compass accompanied by a beeplets you orient your antenna or satellite dish following theacceleration of beeps or the arrow of the compass. Theaccelerometer is used to verify that the holder of your antenna isvertical. The antenna or satellite dish adjustment steps: 1- choosea satellite and authorize geolocation to determine the direction ofthe antenna orientation. 2- Show satellite in augmented realitywith your camera and make sure there are no obstacles and validatethe location of your antenna. 3. Check that the support of yourantenna is vertical. 4. Calculate the polarization and adjust therotation of the LNB (the head of your antenna) 5. Set the elevation6- Search orientation with visual and sound assistant 7- Fineadjustments. For the good functioning of the application,SatCatcher will need the camera, compass, gyroscope, accelerometerand the GPS of your smartphone. tips: - If your smartphone does nothave GPS, you can manually move the "marker" on the card until itpoints your exact location. Use zoom for more detail. - The compassis very important to adjust your dish, but if your smartphone doesnot have one, you can still use the application. In this case, itwill help you to find clues and marks on the map from yourlocation. It also allows you to calculate the orientation. Than youcan use a manual compass to get a good orientation. - Do nothesitate to recalibrate the compass and avoid too close to theantenna arm, because it is sensitive to metallic elements. Try toplace your smartphone where there is less magnetic interference.Contact : [email protected]
Instalación Antena Parabólica 3.1
InfoSofty
orientación de la parabólica, apuntando e instalación siempre hasido una tarea complicada, especialmente si usted no tiene ni idea.Es por eso que he publicado esta aplicación que simplificará estatarea y le permitirá instalar y alinear su antena o antenaparabólica sin la necesidad de llamar a un especialista.SatCatcheres un puntero buscador de satélite y antena parabólica, que lepermite orientarse la antena para cualquier satélite. El uso de larealidad aumentada, esta aplicación muestra el satélite objetivo enel espacio para elegir mejor la ubicación de su antena o antenaparabólica y asegurar la ausencia de cualquier obstáculo (pared,árbol ...).SatCatcher también utiliza el GPS del teléfono paramostrar su ubicación en un mapa y muestra la dirección del satélitedesde su posición.La brújula acompañado de un pitido le permiteorientar su antena o antena parabólica después de la aceleración depitidos o la flecha de la brújula.El acelerómetro se utiliza paraverificar que el titular de la antena es vertical.Los pasos deajuste plato de la antena o satélite:1- Elegir un satélite yautorizar geolocalización para determinar la dirección de laorientación de la antena.2- Mostrar satélite en la realidadaumentada con la cámara y asegúrese de que no hay obstáculos yvalidar la ubicación de su antena.3. Comprobar que el soporte de laantena es vertical.4. Calcular la polarización y ajustar larotación de la LNB (la cabecera de la antena)5. Establecer laelevación6- Buscar orientación con el asistente de imagen ysonido7- Los ajustes finos.Para el buen funcionamiento de laaplicación, SatCatcher necesitará la cámara, brújula, giroscopio,acelerómetro y el GPS de su teléfono inteligente.consejos:- Si eldispositivo no tiene GPS, puede mover manualmente el "marcador" enla tarjeta hasta que señale su ubicación exacta. Utilizar el zoompara obtener más detalles.- La brújula es muy importante ajustar suplato, pero si el smartphone no tiene uno, usted todavía puedeutilizar la aplicación. En este caso, se le ayudará a encontrarpistas y marcas en el mapa de su ubicación. También le permitecalcular la orientación. Que se puede utilizar una brújula manualpara obtener una buena orientación.- No dude en volver a calibrarla brújula y evitar demasiado cerca del brazo de la antena, ya quees sensible a los elementos metálicos. Trate de colocar el teléfonointeligente donde hay menos interferencia magnética.Contacto:[email protected] of the satellite,pointing and installation has always been a difficult task,especially if you have no idea. That's why I posted thisapplication that will simplify this task and allow you to installand align your antenna or satellite dish without the need to call aspecialist.SatCatcher is a search pointer TV and satellite dishthat allows you to orient the antenna for any satellite. The use ofaugmented reality, this application shows the target satellite inspace to better choose the location of your antenna or satellitedish and ensure the absence of any obstacle (wall, tree...).SatCatcher also uses the phone's GPS to show your location ona map and shows the direction of the satellite from itsposition.The compass accompanied by a beep lets you orient yourantenna or satellite dish after acceleration of beeps or the arrowof the compass.The accelerometer is used to verify that the holderof the antenna is vertical.The adjustment steps dish antenna orsatellite:1- Choose a satellite and authorize geolocation todetermine the direction of orientation of the antenna.2- Showsatellite augmented reality with the camera and make sure there areno obstacles and validate the location of your antenna.3. Checkthat the antenna support is vertical.4. Calculate and adjusting thepolarization rotation of the LNB (the head of the antenna)5. Setthe elevation6- Seek guidance with assistant image and sound7- Thefine adjustments.For the proper functioning of the application,SatCatcher need the camera, compass, gyroscope, accelerometer andGPS of your smartphone.tips:- If the device does not have GPS, youcan manually move the "marker" on the card until it points yourexact location. Zooming for more details.- The compass is veryimportant to adjust your dish, but if the smartphone does not haveone, you can still use the application. In this case, you will helpto find clues and markers on the map of your location. It alsoallows you to calculate the orientation. You can use a manualcompass for good orientation.- Do not hesitate to recalibrate thecompass and avoid too close to the arm of the antenna since it issensitive to metallic elements. Try to place the smartphone wherethere is less magnetic interference.Contact:[email protected]
Orientar Antena Parabólica 3.1
InfoSofty
orientación de la parabólica, apuntando e instalación siempre hasido una tarea complicada, especialmente si usted no tiene ni idea.Es por eso que he publicado esta aplicación que simplificará estatarea y le permitirá instalar y alinear su antena o antenaparabólica sin la necesidad de llamar a un especialista.SatCatcheres un puntero buscador de satélite y antena parabólica, que lepermite orientarse la antena para cualquier satélite. El uso de larealidad aumentada, esta aplicación muestra el satélite objetivo enel espacio para elegir mejor la ubicación de su antena o antenaparabólica y asegurar la ausencia de cualquier obstáculo (pared,árbol ...).SatCatcher también utiliza el GPS del teléfono paramostrar su ubicación en un mapa y muestra la dirección del satélitedesde su posición.La brújula acompañado de un pitido le permiteorientar su antena o antena parabólica después de la aceleración depitidos o la flecha de la brújula.El acelerómetro se utiliza paraverificar que el titular de la antena es vertical.Los pasos deajuste plato de la antena o satélite:1- Elegir un satélite yautorizar geolocalización para determinar la dirección de laorientación de la antena.2- Mostrar satélite en la realidadaumentada con la cámara y asegúrese de que no hay obstáculos yvalidar la ubicación de su antena.3. Comprobar que el soporte de laantena es vertical.4. Calcular la polarización y ajustar larotación de la LNB (la cabecera de la antena)5. Establecer laelevación6- Buscar orientación con el asistente de imagen ysonido7- Los ajustes finos.Para el buen funcionamiento de laaplicación, SatCatcher necesitará la cámara, brújula, giroscopio,acelerómetro y el GPS de su teléfono inteligente.consejos:- Si eldispositivo no tiene GPS, puede mover manualmente el "marcador" enla tarjeta hasta que señale su ubicación exacta. Utilizar el zoompara obtener más detalles.- La brújula es muy importante ajustar suplato, pero si el smartphone no tiene uno, usted todavía puedeutilizar la aplicación. En este caso, se le ayudará a encontrarpistas y marcas en el mapa de su ubicación. También le permitecalcular la orientación. Que se puede utilizar una brújula manualpara obtener una buena orientación.- No dude en volver a calibrarla brújula y evitar demasiado cerca del brazo de la antena, ya quees sensible a los elementos metálicos. Trate de colocar el teléfonointeligente donde hay menos interferencia magnética.SatCatchergratis es la versión lite de SatCatcher.La realidad aumentada y laorientación de la brújula sólo están disponibles en la versióncompleta aquí:https://play.google.com/store/apps/details?id=com.InfoSoftyContact.SatCatcherEsContacto:[email protected] dish pointing, pointing andinstallation has always been a difficult task, especially if youhave no idea. That's why I posted this application will simplifythis task and allow you to install and align your antenna orsatellite dish without the need to call a specialist.SatCatcher isa search pointer TV and satellite dish that allows you to orientthe antenna for any satellite. Using augmented reality, thisapplication displays the target satellite in space to better choosethe location of your antenna or satellite dish and ensure theabsence of any obstacle (wall, tree ...).SatCatcher also uses thephone's GPS to show your location on a map and shows the directionof the satellite from its position.Compass accompanied by a beeplets you target your antenna or satellite dish after accelerationof beeps or the arrow of the compass.The accelerometer is used toverify that the holder of the antenna is vertical.The adjustmentsteps dish antenna or satellite:1- Choose a satellite and authorizegeolocation to determine the direction of orientation of theantenna.2- Show satellite augmented reality with the camera andmake sure there are no obstacles and validate the location of yourantenna.3. Check that the antenna support is vertical.4. Calculateand adjusting the polarization rotation of the LNB (the head of theantenna)5. Set the elevation6- Seek guidance with assistant imageand sound7- Fine adjustments.For the proper functioning of theapplication, SatCatcher need the camera, compass, gyroscope,accelerometer and GPS of your smartphone.tips:- If the device doesnot have GPS, you can manually move the "marker" on the card untilit points your exact location. Zooming for more details.- Thecompass is very important to adjust your dish, but if yoursmartphone does not have one, you can still use the application. Inthis case, you will help to find clues and markers on the map ofyour location. It also allows you to calculate the orientation. Youcan use a manual compass for good orientation.- Feel free torecalibrate the compass and avoid too close to the antenna arm, asit is sensitive to metal elements. Try to place the smartphonewhere there is less magnetic interference.SatCatcher free is thelite version of SatCatcher.Augmented reality and orientation of thecompass are only available in the full version here:https://play.google.com/store/apps/details?id=com.InfoSoftyContact.SatCatcherEsContact:[email protected]
Installation Parabole+Pointage 3.2
InfoSofty
Pointage et installation facile de votre antenne parabole avec unaffichage précis des satellites : Le réglage d’une parabole atoujours été une tâche compliquée, surtout si vous ne disposezd’aucun indice. C’est pour cela que j’ai mis en ligne cetteapplication qui simplifiera cette tâche et vous permettra del’installer de votre parabole ou votre antenne sans avoir besoind’appeler un spécialiste. SatCatcher est une application qui vouspermet d’orienter votre parabole ou antenne vers n’importe quelsatellite. Grâce à la réalité augmentée, cette application affichele satellite cible dans l’espace afin de mieux choisirl’emplacement de votre parabole ou antenne et de s’assurer del’absence d’un éventuel obstacle (mur, arbre…). SatCatcher utiliseégalement le GPS pour afficher votre position sur une carte puisaffiche la direction du satellite depuis votre position. Laboussole accompagnée d’un bip sonore vous permet d’orienter votreantenne ou parabole en suivant l’accélération des bips ou la flèchede la boussole. L’accéléromètre est utilisé pour vérifier que lesupport de votre antenne ou parabole est bien vertical. Les étapesde réglage de l’antenne ou la parabole: 1- choisir un satellite etautoriser la géolocalisation pour calculer le sens d’orientation del’antenne ou la parabole. 2- Afficher le satellite en réalitéaugmentée grâce à votre caméra et s’assurer qu’il n’y a pasd’obstacle et valider l’emplacement de votre antenne ou parabole.3- Vérifier que le support de votre antenne ou parabole est bienvertical. 4- Calculer la polarisation et ajuster la rotation du LNB(la tête de votre antenne ou parabole) 5- Régler l’élévation 6-Rechercher l’orientation grâce à l’assistant visuel et sonore 7-Affiner les réglages. Pour le bon fonctionnement de l’application,SatCatcher aura besoin de la caméra, la boussole, le gyroscope,l’accéléromètre et le GPS de votre smartphone. Astuces : - Si votresmartphone ne possède pas de GPS, vous pouvez déplacer manuellementle « marker » sur la carte jusqu’à ce qu’il pointe votreposition exacte. Utilisez le zoom pour plus de précisions. - Laboussole est très importante pour régler votre parabole, mais sivotre smartphone n’en possède pas, vous pouvez quand même utiliserl’application. Dans ce cas, elle vous aidera à fixer des repèresgrâce à la direction affichée sur la carte depuis votre position.Elle vous permet également de calculer l’orientation. Il ne vousrestera plus qu’à utiliser une boussole manuelle pour vousorienter. - N’hésitez pas à recalibrer la boussole et éviter del’approchez trop près du bras de la parabole car elle est sensibleaux éléments métalliques. Essayer de placer votre smartphone la ouil y a le moins d’interférences magnétiques. SatCatcher Free est laversion lite du SatCatcher. La réalité augmentée et l'orientationboussole sont uniquement disponibles dans la version complète ici :https://play.google.com/store/apps/details?id=com.InfoSoftyContact.SatCatcherContact : [email protected] Pointing and easyinstallation of your satellite dish with an accurate display ofsatellites: Setting a parable has always been a complicated task,especially if you do not have a clue. That is why I posted thisapplication that will simplify this task and allow you to installyour satellite dish or antenna without the need to call aspecialist. SatCatcher is an application that allows you to orientyour antenna or satellite dish to any satellite. Using augmentedreality, this application displays the target satellite into spaceto better choose the location of your dish or antenna and ensurethe absence of any obstacle (wall, tree ...). SatCatcher also usesGPS to show your location on a map and shows the direction of thesatellite from your position. The compass accompanied by a beeplets you orient your antenna or satellite dish, following theacceleration of beeps or the arrow of the compass. Theaccelerometer is used to verify that the holder of your antenna orsatellite dish is vertical. The adjustment steps of the antenna orsatellite dish: 1- choose a satellite and authorize geolocation todetermine the direction of orientation of the antenna or satellitedish. 2- View satellite actually increased with your camera andmake sure there are no obstacles and validate the location of yourantenna or parabola. 3. Check that the support of your antenna orsatellite dish is vertical. 4. Calculate the polarization andadjust the rotation of the LNB (head to your antenna or satellitedish) 5. Set the elevation 6- Search guidance through visual andsound assistant 7- Filter settings. For the proper functioning ofthe application, SatCatcher will need the camera, compass,gyroscope, accelerometer and GPS from your smartphone. tips: - Ifyour smartphone does not have GPS, you can manually move the"marker" on the card until it points your exact location. Zoom infor more detail. - The compass is very important to adjust yourdish, but if your smartphone does not have one, you can still usethe application. In this case, it will help set benchmarks with thedirection on the map from your location. It also allows you tocalculate the orientation. It will do more than use a manualcompass for orientation. - Do not hesitate to recalibrate thecompass and avoid too close to the parable of the arm because it issensitive to metallic elements. Try to place your smartphone or thethere is less magnetic interference. SatCatcher Free is the liteversion of SatCatcher. Augmented reality and compass orientationare only available in the full version here:https://play.google.com/store/apps/details?id=com.InfoSoftyContact.SatCatcherContact: [email protected]
Instalação antena parabólica - 3.1
InfoSofty
alinhamento prato, apontador e Instalação sempre foi uma tarefacomplicada, especialmente se você não tem uma pista. É por isso queeu postei esta aplicação que irá simplificar esta tarefa epermitir-lhe instalar e alinhar a sua antena ou antena parabólica,sem a necessidade de chamar um especialista.SatCatcher é umponteiro localizador por satélite e do prato, que lhe permiteorientar a antena para um satélite. Usando realidade aumentada,esta aplicação mostra o satélite de destino no espaço para melhorescolher o local de sua antena ou antena parabólica e garantir aausência de qualquer obstáculo (parede, árvore ...).SatCatchertambém usa o seu telefone GPS para mostrar a sua localização em ummapa e mostra a direção do satélite a partir de sua posição.Abússola acompanhada por um sinal sonoro permite orientar a suaantena ou antena parabólica na sequência da aceleração dos sinaissonoros ou a seta da bússola.O acelerômetro é usado para verificarse o titular da sua antena é vertical.Os passos de ajuste prato daantena ou satélite:1- escolher um satélite e autorizargeolocalização para determinar a direcção de orientação daantena.2- Mostrar satélite em realidade aumentada com sua câmera ecertifique-se de que não existem obstáculos e validar a localizaçãode sua antena.3. Verifique se o apoio de sua antena é vertical.4.Calcule a polarização e ajustar a rotação do LNB (a cabeça de suaantena)5. Defina a elevação6- Busca orientação com o assistentevisual e sonora7- Belas ajustes.Para o bom funcionamento daaplicação, SatCatcher vai precisar da câmera, bússola, giroscópio,acelerômetro e GPS do seu smartphone.dicas:- Se o smartphone nãotem GPS, você pode mover manualmente o "marcador" no cartão até queele aponte sua localização exacta. Use o zoom para mais detalhes.-A bússola é muito importante para ajustar o seu prato, mas se o seusmartphone não tiver um, você ainda pode usar o aplicativo. Nestecaso, ele vai ajudar você a encontrar pistas e marcas no mapa desua localização. Ele também permite calcular a orientação. Do quevocê pode usar uma bússola manual para obter uma boa orientação.-Não hesite em recalibrar a bússola e evitar demasiado perto dobraço de antena, porque é sensível a elementos metálicos. Tentecolocar seu smartphone onde há menos interferência magnética.OSatCatcher Free é a versão lite do SatCatcher.A realidade aumentadae a orientação da bússola estão disponíveis apenas na versãocompleta aqui:https://play.google.com/store/apps/details?id=com.InfoSoftyContact.SatCatcherPoContato:[email protected] plate, pointing andinstallation has always been a complicated task, especially if youdo not have a clue. That's why I posted this application that willsimplify this task and allow you to install and align your antennaor satellite dish, without the need to call an expert.SatCatcher isa pointer locator satellite and dish, that allows you to orient theantenna to a satellite. Using augmented reality, this applicationshows the target satellite in space to better choose the locationof your antenna or satellite dish and ensure the absence of anyobstacle (wall, tree ...).SatCatcher also uses your phone GPS toshow your location on a map and shows the direction of thesatellite from its position.The compass accompanied by an audiblesignal allows direct its antenna or satellite dish as a result ofacceleration of beeps or the arrow of the compass.The accelerometeris used to verify that the holder of your antenna is vertical.Thesteps of the antenna or satellite dish set:1- choose a satelliteand authorize geolocation to determine the direction of the antennaorientation.Show 2 satellite in augmented reality with your cameraand make sure there are no obstacles and validate the location ofyour antenna.3. Check the support of your antenna is vertical.4.Calculate and adjusting the polarization rotation of the LNB (thehead of its antenna)5. Set the elevation6- Search guidance withvisual and sound assistant7. Fine adjustments.For the properfunctioning of the application, SatCatcher will need the camera,compass, gyroscope, accelerometer and GPS of your smartphone.tips:-If the phone does not have GPS, you can manually move the "marker"on the card until it points your exact location. Use the zoom formore details.- The compass is very important to adjust your dish,but if your smartphone does not have one, you can still use theapplication. In this case, it will help you to find clues and markson the map of your location. It also allows you to calculate theorientation. Than you can use a manual compass to get a goodorientation.- not hesitate to recalibrate the compass and to avoidtoo close to the antenna arm because it is sensitive to metallicelements. Try to put your smartphone where there is less magneticinterference.The SatCatcher Free is the lite version ofSatCatcher.Augmented reality and orientation of the compass is onlyavailable in the full version here:https://play.google.com/store/apps/details?id=com.InfoSoftyContact.SatCatcherPoContact:[email protected]
Instalação antena parabólica 3.1
InfoSofty
alinhamento prato, apontador e Instalação sempre foi uma tarefacomplicada, especialmente se você não tem uma pista. É por isso queeu postei esta aplicação que irá simplificar esta tarefa epermitir-lhe instalar e alinhar a sua antena ou antena parabólica,sem a necessidade de chamar um especialista.SatCatcher é umponteiro localizador por satélite e do prato, que lhe permiteorientar a antena para um satélite. Usando realidade aumentada,esta aplicação mostra o satélite de destino no espaço para melhorescolher o local de sua antena ou antena parabólica e garantir aausência de qualquer obstáculo (parede, árvore ...).SatCatchertambém usa o seu telefone GPS para mostrar a sua localização em ummapa e mostra a direção do satélite a partir de sua posição.Abússola acompanhada por um sinal sonoro permite orientar a suaantena ou antena parabólica na sequência da aceleração dos sinaissonoros ou a seta da bússola.O acelerômetro é usado para verificarse o titular da sua antena é vertical.Os passos de ajuste prato daantena ou satélite:1- escolher um satélite e autorizargeolocalização para determinar a direcção de orientação daantena.2- Mostrar satélite em realidade aumentada com sua câmera ecertifique-se de que não existem obstáculos e validar a localizaçãode sua antena.3. Verifique se o apoio de sua antena é vertical.4.Calcule a polarização e ajustar a rotação do LNB (a cabeça de suaantena)5. Defina a elevação6- Busca orientação com o assistentevisual e sonora7- Belas ajustes.Para o bom funcionamento daaplicação, SatCatcher vai precisar da câmera, bússola, giroscópio,acelerômetro e GPS do seu smartphone.dicas:- Se o smartphone nãotem GPS, você pode mover manualmente o "marcador" no cartão até queele aponte sua localização exacta. Use o zoom para mais detalhes.-A bússola é muito importante para ajustar o seu prato, mas se o seusmartphone não tiver um, você ainda pode usar o aplicativo. Nestecaso, ele vai ajudar você a encontrar pistas e marcas no mapa desua localização. Ele também permite calcular a orientação. Do quevocê pode usar uma bússola manual para obter uma boa orientação.-Não hesite em recalibrar a bússola e evitar demasiado perto dobraço de antena, porque é sensível a elementos metálicos. Tentecolocar seu smartphone onde há menos interferênciamagnética.Contato: [email protected] plate,pointing and installation has always been a complicated task,especially if you do not have a clue. That's why I posted thisapplication that will simplify this task and allow you to installand align your antenna or satellite dish, without the need to callan expert.SatCatcher is a pointer locator satellite and dish, thatallows you to orient the antenna to a satellite. Using augmentedreality, this application shows the target satellite in space tobetter choose the location of your antenna or satellite dish andensure the absence of any obstacle (wall, tree ...).SatCatcher alsouses your phone GPS to show your location on a map and shows thedirection of the satellite from its position.The compassaccompanied by an audible signal allows direct your antenna orsatellite dish following the acceleration of beeps or the arrow ofthe compass.The accelerometer is used to verify that the holder ofyour antenna is vertical.The steps of the antenna or satellite dishset:1- choose a satellite and authorize geolocation to determinethe direction of the antenna orientation.2 Show satellite augmentedreality with your camera and make sure that there are no obstaclesand validate the location of your antenna.3. Check the support ofyour antenna is vertical.4. Calculate the polarization and adjustthe rotation of the LNB (the head of your antenna)5. Set theelevation6- Search guidance with visual and sound assistant7 Fineadjustments.For the proper functioning of the application,SatCatcher will need the camera, compass, gyroscope, accelerometerand GPS from your smartphone.tips:- If the phone does not have GPS,you can manually move the "marker" on the card until it points yourexact location. Use the zoom for more details.- The compass is veryimportant to adjust your dish, but if your smartphone does not haveone, you can still use the application. In this case, it will helpyou to find clues and marks on the map of your location. It alsoallows you to calculate the orientation. Than you can use a manualcompass to get a good orientation.- Do not hesitate to recalibratethe compass and avoid too close to the antenna arm because it issensitive to metallic elements. Try to put your smartphone wherethere is less magnetic interference.Contact:[email protected]
Satellitenschüssel Zeiger und Dish Installation 3.1
InfoSofty
Einfache Positionierung und Installation Ihrer Satellitenantennemit akkurater Satellitenanzeige:Dish Alignment, Pointing undInstallation war immer eine schwierige Aufgabe, besonders wenn Siekeine Ahnung haben. Aus diesem Grund habe ich diese Anwendungveröffentlicht, die diese Aufgabe vereinfacht und es Ihnenermöglicht, Ihre Antenne oder Satellitenschüssel zu installierenund auszurichten, ohne dass Sie einen Spezialisten anrufenmüssen.SatCatcher ist ein Satelliten-Finder und Dish-Pointer,ermöglicht es Ihnen, Ihre Antenne an jedem Satelliten auszurichten.Mit Augmented Reality, diese Anwendung zeigt die Ziel-Satellit imRaum, um besser den Standort Ihrer Antenne oder Satelliten-Schüsselund stellen Sie sicher, dass das Fehlen eines Hindernis (Wand, Baum...).SatCatcher verwendet auch Ihr Telefon GPS, um Ihre Positionauf einer Karte zu zeigen und zeigt die Richtung des Satelliten vonihrer Position.Der Kompass, der von einem Signalton begleitet wird,ermöglicht Ihnen, Ihre Antenne oder Satelliten-Teller nach derBeschleunigung von beeps oder dem Pfeil des Kompassesauszurichten.Der Beschleunigungsmesser wird verwendet, um zuüberprüfen, ob der Halter ihrer Antenne vertikal ist.Die Antenneoder Satelliten-Schüssel-Schritte:1-Wählen Sie einen Satellit undautorisieren Sie GPS, um die Richtung der Ausrichtung der Antennezu bestimmen.2-Show Satellite in Augmented Reality mit Ihrer Kameraund stellen Sie sicher, es gibt keine Hindernisse und überprüfenSie die Position Ihrer Antenne.3. Überprüfen Sie, ob dieUnterstützung Ihrer Antenne vertikal ist.4. berechnen Sie diePolarisation und justieren Sie die Drehung des LNB5. elevationeinstellen6-Suche Orientierung mit visuellen und SoundAssistant7-Fine Anpassungen.Für die gute Funktionsweise derAnwendung, SatCatcher wird die Kamera, Kompass, Kreisel,Beschleunigungsmesser und das GPS Ihres Smartphonesbenötigen.Tipps:-Wenn Ihr Smartphone nicht über GPS, können Siemanuell bewegen Sie die Markierung auf der Karte, bis Sie Ihregenaue Position zeigt. Verwenden Sie Zoom für mehr Details.-DerKompass ist sehr wichtig, um Ihre Antenne Teller anzupassen, aberwenn Ihr Smartphone nicht über ein, können Sie immer noch dieAnwendung verwenden. In diesem Fall wird es Ihnen helfen,Anhaltspunkte und Markierungen auf der Karte von Ihrem Standort zufinden. Außerdem können Sie die Orientierung berechnen. Als Sieeinen manuellen Kompass verwenden können, um eine gute Orientierungzu erhalten.-Zögern Sie nicht, den Kompass neu zu kalibrieren undvermeiden, zu nah an der Antenne Arm, weil es empfindlich aufmetallische Elemente. Versuchen Sie, Ihr Smartphone zu platzieren,wo es weniger magnetische Störungen.Kontakt :[email protected] positioning and installation ofyour satellite antenna with accurate satellite display:DishAlignment, Pointing and installation has always been a difficulttask, especially if you have no idea. For this reason I publishedthis application that simplifies this task and allows you toinstall your antenna or satellite dish and align without having tocall a specialist.SatCatcher is a satellite finder and Dish pointerallows you to adjust your antenna to each satellite. With augmentedreality, this application the target satellite is in space tobetter the location of your antenna or satellite dish and make surethat the absence of an obstacle (wall, tree ...). SatCatcher usedyour phone GPS, your position to show on a map, and shows thedirection of the satellite from its Position.Der compass, which isaccompanied by an acoustic signal and enables you to your antennaor satellite dish after acceleration of beeps or the arrow of thecompass auszurichten.Der accelerometer is used to verify that theholder of its antenna is vertical.The antenna or satellite dishsteps:1 Choose a satellite and authorize GPS to determine thedirection of orientation of the antenna.2 show Satellite inaugmented reality with your camera and make sure there are noobstructions and check. The position of your antenna3. Check thatthe support of your antenna is vertical.4. Calculate thepolarization and adjust the rotation of the LNB5. Adjust elevation6search guidance with visual and sound Assistant7 Fineadjustments.the camera, compass, gyroscope, accelerometer and theGPS of your smartphone will need for the good functioning of theapplication, SatCatcher.Tips:-If your phone does not have GPS, youcan manually move the marker on the map until you show your exactlocation. Use zoom for more details.-The compass is very importantto adjust your antenna dish, but if your smartphone does not haveone, you can still use the application. In this case, it will helpyou to find clues and markers on the map on your location. You canalso calculate the orientation. When you can use a manual compassto get a good orientation.Do not -Zögern to calibrate the compassagain and avoid too close to the antenna arm because it issensitive to metallic elements. Try to place your Smartphone, wherethere is less magnetic interference.Contact:[email protected]
Dish Installation, Zeiger und Ausrichtung 3.1
InfoSofty
Einfache Positionierung und Installation Ihrer Satellitenantennemit akkurater Satellitenanzeige:Dish Alignment, Pointing undInstallation war immer eine schwierige Aufgabe, besonders wenn Siekeine Ahnung haben. Aus diesem Grund habe ich diese Anwendungveröffentlicht, die diese Aufgabe vereinfacht und es Ihnenermöglicht, Ihre Antenne oder Satellitenschüssel zu installierenund auszurichten, ohne dass Sie einen Spezialisten anrufenmüssen.SatCatcher ist ein Satelliten-Finder und Dish-Pointer,ermöglicht es Ihnen, Ihre Antenne an jedem Satelliten auszurichten.Mit Augmented Reality, diese Anwendung zeigt die Ziel-Satellit imRaum, um besser den Standort Ihrer Antenne oder Satelliten-Schüsselund stellen Sie sicher, dass das Fehlen eines Hindernis (Wand, Baum...).SatCatcher verwendet auch Ihr Telefon GPS, um Ihre Positionauf einer Karte zu zeigen und zeigt die Richtung des Satelliten vonihrer Position.Der Kompass, der von einem Signalton begleitet wird,ermöglicht Ihnen, Ihre Antenne oder Satelliten-Teller nach derBeschleunigung von beeps oder dem Pfeil des Kompassesauszurichten.Der Beschleunigungsmesser wird verwendet, um zuüberprüfen, ob der Halter ihrer Antenne vertikal ist.Die Antenneoder Satelliten-Schüssel-Schritte:1-Wählen Sie einen Satellit undautorisieren Sie GPS, um die Richtung der Ausrichtung der Antennezu bestimmen.2-Show Satellite in Augmented Reality mit Ihrer Kameraund stellen Sie sicher, es gibt keine Hindernisse und überprüfenSie die Position Ihrer Antenne.3. Überprüfen Sie, ob dieUnterstützung Ihrer Antenne vertikal ist.4. berechnen Sie diePolarisation und justieren Sie die Drehung des LNB5. elevationeinstellen6-Suche Orientierung mit visuellen und SoundAssistant7-Fine Anpassungen.Für die gute Funktionsweise derAnwendung, SatCatcher wird die Kamera, Kompass, Kreisel,Beschleunigungsmesser und das GPS Ihres Smartphonesbenötigen.Tipps:-Wenn Ihr Smartphone nicht über GPS, können Siemanuell bewegen Sie die Markierung auf der Karte, bis Sie Ihregenaue Position zeigt. Verwenden Sie Zoom für mehr Details.-DerKompass ist sehr wichtig, um Ihre Antenne Teller anzupassen, aberwenn Ihr Smartphone nicht über ein, können Sie immer noch dieAnwendung verwenden. In diesem Fall wird es Ihnen helfen,Anhaltspunkte und Markierungen auf der Karte von Ihrem Standort zufinden. Außerdem können Sie die Orientierung berechnen. Als Sieeinen manuellen Kompass verwenden können, um eine gute Orientierungzu erhalten.-Zögern Sie nicht, den Kompass neu zu kalibrieren undvermeiden, zu nah an der Antenne Arm, weil es empfindlich aufmetallische Elemente. Versuchen Sie, Ihr Smartphone zu platzieren,wo es weniger magnetische Störungen.SatCatcher Free ist die LiteVersion von SatCatcher.Augmented Reality und Compass Orientierungsind nur in der Vollversion erhältlich:https://play.google.com/store/apps/details?id=com.InfoSoftyContact.SatCatcherAlKontakt: [email protected] positioning and installationof your satellite antenna with accurate satellite display:DishAlignment, Pointing and installation has always been a difficulttask, especially if you have no idea. For this reason I publishedthis application that simplifies this task and allows you toinstall your antenna or satellite dish and align without having tocall a specialist.SatCatcher is a satellite finder and Dish pointerallows you to adjust your antenna to each satellite. With augmentedreality, this application the target satellite is in space tobetter the location of your antenna or satellite dish and make surethat the absence of an obstacle (wall, tree ...). SatCatcher usedyour phone GPS, your position to show on a map, and shows thedirection of the satellite from its Position.Der compass, which isaccompanied by an acoustic signal and enables you to your antennaor satellite dish after acceleration of beeps or the arrow of thecompass auszurichten.Der accelerometer is used to verify that theholder of its antenna is vertical.The antenna or satellite dishsteps:1 Choose a satellite and authorize GPS to determine thedirection of orientation of the antenna.2 show Satellite inaugmented reality with your camera and make sure there are noobstructions and check. The position of your antenna3. Check thatthe support of your antenna is vertical.4. Calculate thepolarization and adjust the rotation of the LNB5. Adjust elevation6search guidance with visual and sound Assistant7 Fineadjustments.the camera, compass, gyroscope, accelerometer and theGPS of your smartphone will need for the good functioning of theapplication, SatCatcher.Tips:-If your phone does not have GPS, youcan manually move the marker on the map until you show your exactlocation. Use zoom for more details.-The compass is very importantto adjust your antenna dish, but if your smartphone does not haveone, you can still use the application. In this case, it will helpyou to find clues and markers on the map on your location. You canalso calculate the orientation. When you can use a manual compassto get a good orientation.Do not -Zögern to calibrate the compassagain and avoid too close to the antenna arm because it issensitive to metallic elements. Try to place your Smartphone, wherethere is less magnetic interference.SatCatcher Free is the liteversion of SatCatcher.Augmented Reality and compass orientation areonly available in the fullversion: https://play.google.com/store/apps/details?id=com.InfoSoftyContact.SatCatcherAlContact:[email protected]