1.4.0 / June 3, 2014
(4.8/5) (23)

Description

eBITS – Extreme Bricks Infrastructure Traffic Simulator DescriptionExtreme Bricks Infrastructure Traffic Simulator (eBITS) Androidapplication allows users to perform a quick validation of wirelessnetwork connectivity. By utilizing two devices running the eBITSAndroid application, users can configure the Transmit / Receivenode parameters along with defining the TCP settings on thetransmitter in order to establish successful bi-directionalcommunication validation between the two nodes. How to use: -Oncethe application has been successfully installed on two mobiledevices, configure both devices to connect to the same WirelessSSID and validate successful IP Address assignment. -On the nodedesignated as the Transmitter, configure the setup parameters forthe Receiver station by entering in the second node’s IP Address.-On the node designated as the Receiver, configure the Transmitteroption to OFF. -Once the communication parameters have been set,press the START button on both devices. Traffic should be sent fromthe Transmitter node and received on the Receiver. For moreinformation on Extreme Networks, please visithttp://www.extremenetworks.com

App Information eBITS

Extreme Networks Show More...
eBITS 1.4.0 APK
eBITS – Extreme Bricks Infrastructure Traffic Simulator DescriptionExtreme Bricks Infrastructure Traffic Simulator (eBITS) Androidapplication allows users to perform a quick validation of wirelessnetwork connectivity. By utilizing two devices running the eBITSAndroid application, users can configure the Transmit / Receivenode parameters along with defining the TCP settings on thetransmitter in order to establish successful bi-directionalcommunication validation between the two nodes. How to use: -Oncethe application has been successfully installed on two mobiledevices, configure both devices to connect to the same WirelessSSID and validate successful IP Address assignment. -On the nodedesignated as the Transmitter, configure the setup parameters forthe Receiver station by entering in the second node’s IP Address.-On the node designated as the Receiver, configure the Transmitteroption to OFF. -Once the communication parameters have been set,press the START button on both devices. Traffic should be sent fromthe Transmitter node and received on the Receiver. For moreinformation on Extreme Networks, please visithttp://www.extremenetworks.com
eBITS HD 1.1.0 APK
eBITS HD – Extreme Bricks Infrastructure Traffic SimulatorDescription Extreme Bricks Infrastructure Traffic Simulator (eBITS)allows users to perform a quick validation of wireless networkconnectivity. By utilizing two devices running eBITS, users canconfigure the Transmit / Receive node parameters along withdefining the TCP settings on the transmitter in order to establishsuccessful bi-directional communication validation between the twonodes. How to use: -Once the application has been successfullyinstalled on two mobile devices, configure both devices to connectto the same Wireless SSID and validate successful IP Addressassignment. -On the node designated as the Transmitter, configurethe setup parameters for the Receiver station by entering in thesecond node’s IP Address. -On the node designated as the Receiver,configure the Transmitter option to OFF. -Once the communicationparameters have been set, press the START button on both devices.Traffic should be sent from the Transmitter node and received onthe Receiver. For more information on Extreme Networks, pleasevisit http://www.extremenetworks.com
ExtremeCloud™ Mobile 1.1.2 APK
The ExtremeCloud™ Mobile application allows administrators toquickly provision cloud-managed network devices, providingenterprise-grade network services quickly and efficiently. Theapplication can be used by administrators and/or installers duringinstallation to associate network devices to pre-configured networkservices ensuring that network services are available as soon asthe network device is installed. How to use: 1. Log in with yourExtremeCloud credentials2. Tap scan3. Scan the device's QR code4.Tap OK to confirm the default device name, or enter a custom nameand tap OK.5. Repeat steps 4 - 5 for each new device6. Tap Done7.The Devices list displays.8. Review the device list. You candeselect any device that you do not want to register9. TapRegister10. Edit the Site information or use the toggle button tohide the expanded information11. Tap Register
ExtremeLocation™ Toolbox 3.1.2 APK
ExtremeLocation™ Toolbox is designed to help the Networkadministrators responsible for deploying ExtremeLocation™ in theirsites. This application is not meant to be used by Wi-Fi end users.The application is used in conjugation with the ExtremeLocation™servers to create a fingerprint of observed RSSI to known locationswhich are a critical input to the ExtremeLocation™ algorithms. Theapplication can be installed on 1 or 2 supported android devicesdepending on whether either one or both bands need to befingerprinted. The application needs to know the Wi-Fi/BluetoothMAC address of the devices on which it is installed and may sendthese details to the ExtremeLocation™ servers for deeperobservation of the device transmissions. Further, the applicationestimates the location of the device along a known path (input byuser) and indicates to the user when/where to stop along the pathfor the system to collect data. These locations where data iscollected is sent to the server for further analysis andfingerprinting and may be stored in the server.
eBits 1.5.0 APK
eBits – Extreme Bricks Infrastructure Traffic SimulatorDescriptionExtreme Bricks Infrastructure Traffic Simulator (eBits)Androidapplication allows users to perform a quick validation ofwirelessnetwork connectivity. By utilizing two devices running theeBitsAndroid application, users can configure the Transmit /Receivenode parameters along with defining the TCP settings onthetransmitter in order to establish successfulbi-directionalcommunication validation between the two nodes. Howto use: -Oncethe application has been successfully installed on twomobiledevices, configure both devices to connect to the sameWirelessSSID and validate successful IP Address assignment. -On thenodedesignated as the Transmitter, configure the setup parametersforthe Receiver station by entering in the second node’s IPAddress.-On the node designated as the Receiver, configure theTransmitteroption to OFF. -Once the communication parameters havebeen set,press the START button on both devices. Traffic should besent fromthe Transmitter node and received on the Receiver. Formoreinformation on Extreme Networks, pleasevisithttp://www.extremenetworks.com/
ExtremeLocation™ Demo 1.0.0.4 APK
ExtremeLocation beacon engagement using Extreme Locationcloudplatform
ExtremeManagement ZTP+ 1.0.1 APK
Using Extreme Networks' ZTP+ (Zero Touch ProvisioningPlus)functionality, you can quickly add new devices to your networkandconfigure them in Extreme Management Center. Typically, whenaddinga new device to the network, a network administrator connectsaconsole cable to the device to access the local consoleandmanually configure the device. In Management Center, newdevicesare automatically discovered on the network the moment theyareconnected. ZTP+ enabled devices send information toManagementCenter automatically, including the serial number, thenumber andspeed of the ports, and the firmware version. Once a ZTP+device isconnected, you can add it to Management Center withminimal serverconfiguration. In addition, the latest updates areautomaticallydownloaded to the new device. This process minimizesthe amount oftime needed to configure a new device and deploy it onthe network.
ExtremeCloud™ Mobile 1.2.0 APK
The ExtremeCloud™ Mobile application allows administratorstoquickly provision cloud-managed network devices,providingenterprise-grade network services quickly and efficiently.Theapplication can be used by administrators and/or installersduringinstallation to associate network devices to pre-configurednetworkservices ensuring that network services are available assoon asthe network device is installed. How to use: 1. Log in withyourExtremeCloud credentials 2. Tap scan 3. Scan the device's QRcode4. Tap OK to confirm the default device name, or enter acustomname and tap OK. 5. Repeat steps 4 - 5 for each new device 6.TapDone 7. The Devices list displays. 8. Review the device list.Youcan deselect any device that you do not want to register 9.TapRegister 10. Edit the Site information or use the toggle buttontohide the expanded information 11. Tap Register
Loading...