2.0.2 / September 28, 2018
(4.5/5) (54)
Loading...

Description

The Danfoss TurboTool™ App makes it easy for field servicetechnicians to troubleshoot Danfoss Turbocor compressor issues onsite. Field service technicians can utilize this App to identifysymptoms, work through the possible causes, and find remediesthrough suggested required actions. Instantly access the TurboTool™App for compressor troubleshooting and quick reference charts.Please note that the Troubleshooting Guide is meant as suggestionsfor experienced professionals familiar with Danfoss Turbocorcompressors and is not to be used by non-professionals. TurboTool™App belongs to Danfoss A/S How to Use When starting up theTurboTool™ App the user will be presented with two compressorimages. The exterior image of a Danfoss Turbocor compressorrepresents compressor system level troubleshooting, while thecutaway image of a Danfoss Turbocor compressor represents componentlevel troubleshooting. The user selects the area in which they areinterested. This will take them on to the “Symptoms” page wherethey will be able to search for the symptoms being exhibited by thesystem or component. Once the correct symptom has been identifiedit can be selected and expanded to reveal the possible causes ofthis symptom. The user should then select what they believe to bethe relevant cause and will be taken to the “Remedy” page wherethey will be informed of the procedures required to correct theexact symptom/cause. It is easy to move back and forward betweenthe symptom/cause and remedy pages should they need to try othersolutions. Disclaimer The TurboTool™ (“the Application”) isprovided on an “as is” and “as available” basis for the intendedpurposes as determined by Danfoss only and any use hereof is atUser’s sole risk. The Application and results and informationgenerated thereby cannot substitute technical advice but must beverified by the User, they are not promises and should not berelied on as accurate data or analyses. Danfoss disclaims allwarranties and conditions regarding the Application, whetherexpress, implied, or statutory, including, but not limited to,conditions of merchantability, satisfactory quality, fitness for aparticular purpose, accuracy and non-infringement of third parties’rights. Danfoss does not warrant that the Application will meetyour requirements or that the operation hereof will beuninterrupted or error-free. To the extent not prohibited by law,in no event shall Danfoss be liable for any direct, special,indirect or consequential damages, whatsoever, including, withoutlimitation, damage to property, damages for loss of savings orprofits, or loss of data arising out of any use of the Application.®Danfoss Turbocor TurboTool™ support, please [email protected] Please visithttp://turbocor.danfoss.com for more information and contactdetails.

App Information TurboTool®

TurboTool® Version History

Select TurboTool® Version :
  • 1.0.0 (100)
  • TurboTool® 1.0.0 APK File

    Publish Date: 2016 /4/24
    Requires Android: Android 2.3.3+ (Gingerbread, API: 10)
    File Size: 8.8 MB
    Tested on: Android 5.0 (Lollipop, API: 21)
    File Sha1: a742781494359ee5b60fcb535cdd79d07a0bcec5
    APK Signature: fd2116b0fccfbd330561c64b2e722c19c46a3f9c

Danfoss A/S Show More...

Refrigerant Slider 4.1.0 APK
Danfoss A/S
The Refrigerant Slider is an essential tool for HVACR professionalsand gives you access to a user-friendly, quickpressure-to-temperature refrigerant converter. The tool covers morethan 80 different refrigerants, also including natural refrigerantsand you will find information about the various refrigerant typesincluding ammonia and transcritical CO2. This includes informationsuch as Global Warming Potential (GWP) and Ozone DepletingPotential (ODP). You can switch between the IPCC AR4 and AR5values, where the AR4 values are used in relation to the EuropeanF-Gas regulations. The tool is based on NIST Refrigerant Propertiesand is using the Antoine equations for the conversion. You will beable to see both dew and bubble point for refrigerants withglide.Please note that the Refrigerant Slider is not a scientifictool and is intended only as a tool for use in the field.
Danfoss Link™ 1.3.2 APK
Danfoss A/S
The simple and intuitive user interface lets you control your homeheating from anywhere. Download the Danfoss Link™ App and enjoyhome heating of tomorrow:✔ Adjust home heating easily andintuitively with the remote you know the best✔ Stay in full controlof your home heating day and night – even when you are not at home✔Set the temperature to fit your rhythm and enjoy superior thermalcomfort✔ Living Zone – set the temperature in one room or groupmore rooms for easy zone control✔ Save energy by automaticallylowering the temperature when you do not need itThe Danfoss Link™App is compatible with all Wi-Fi enabled Danfoss Link™ CCpanels.Connecting your mobile device with your Danfoss Link™ CC iseasy and lets you control your living connect®radiator thermostats,floor heating and more from anywhere. If you need support or haveany questions aboutthe Danfoss Link™ App, please visitlink.danfoss.com.Do you want to try the app before buying yourDanfoss Link CC?Then simply download the Danfoss Link™ App and trythe built-in demo version of the app.
Coolator 1.0.1 APK
Danfoss A/S
The Coolator app is developed forrefrigeration professionals and includes several practical toolsfor use in the daily work with refrigeration plants.The unit converter is especially aimed at the refrigeration branchand includes the most used units and quantities. The conversionworks two ways, which means that you can either enter the value tobe converted or the intended result. The line calculationcalculates flow values in either liquid or gas lines for variousrefrigerants and the result is displayed as velocity, volume flowand mass flow.How to useUnit conversion:Select the quantity type, e.g. Velocity, Length etc. that you wantunits to be converted between.Select the source or original unit, e.g. m. Then select the targetunit, e.g. in.Now enter the source value, e.g. 15 (m) and the target unit 590.6(in) is displayed immediately.If you change the target value, the source value will instantlychange.Line calculation:Select the line type, liquid or gas, and then select type ofrefrigerant.Select the pipe dimension.Enter the pipe length, the cooling capacity, inlet pressure (thepressure at the beginning of the pipe in question), and thetemperature (at the beginning of the pipe in question).Click Calculate and you will see the results.Engineering TomorrowDanfoss engineers technologies that enable the world of tomorrow todo more with less. We meet the growing need for infrastructure,food supply, energy efficiency and climate-friendly solutions. Ourproducts and services are used in areas such as refrigeration, airconditioning, heating, motor control and mobile machinery. We arealso active in the field of renewable energy as well as districtheating infrastructure for cities and urban communities. Ourinnovative engineering dates back to 1933 and today Danfoss is aworld-leader, employing 22,500 employees and serving customers inmore than 100 countries. We are still privately held by thefounding family. Read more about us at www.danfoss.com.DisclaimerCoolater (“the Application”) is provided on an “as is” and “asavailable” basis for the intended purposes as determined by Danfossonly and any use hereof is at the user’s sole risk. The Applicationand results and information generated thereby cannot substitutetechnical advice but must be verified by the user, they are notpromises and should not be relied on as accurate data oranalyses.Danfoss disclaims all warranties and conditions regarding theApplication, whether express, implied, or statutory, including, butnot limited to, conditions of merchantability, satisfactoryquality, fitness for a particular purpose, accuracy andnon-infringement of third parties’ rights. Danfoss does not warrantthat the Application will meet your requirements or that theoperation hereof will be uninterrupted or error-free.To the extent not prohibited by law, in no event shall Danfoss beliable for any direct, special, indirect or consequential damages,whatsoever, including, without limitation, damage to property,damages for loss of savings or profits, or loss of data arising outof any use of the Application.App support [email protected] visit www.danfoss.com for more information and contactdetails.For more information about local support please visit http://refrigerationandairconditioning.danfoss.com/contact/
Installer App 3.2.3 APK
Danfoss A/S
The Danfoss Heating application provides plumbers, heating and HVACprofessionals and installers with a wide range of dimensioning,calculation and documentation tools. These tools make sales andinstallation of Danfoss products easier. A great tool when workingwith home heating, HVAC, radiators, valves and thermostats.TheDanfoss Heating app for installers is like having a second toolboxright in your pocket at the point of installation. It can help youinstall Danfoss products in a number of ways, and assist in thesales process with a wide range of marketing and support material.Some of the ways this app can help you in your daily workinclude:Radiator Thermostat Support • Calculate pre-setting ofradiator valves by selecting radiator type and size to get correctvalve pressure settings.• Create a project and export the pressingdata in a predefined pdf report• Send pdf report by emailStay tunedfor more upcoming releases including, floor heating installationsupport, balancing valve support and many more..Additional featuresof the Danfoss Heating app include personalization options byspecifying your “favorite tools”. Danfoss is a leading company inthe heating industry offering a wide range of components andsolutions for generation, distribution and use of heat for comfortand energy savings in home and buildings. By continuously improvingproducts and services, we strive to build strong relations tocustomers and business partners throughout the value chain. We havemanufacturing facilities in more than 10 countries, and salescompanies and agents in all heating markets worldwide.
Compass 1.1.3 APK
Danfoss A/S
Compass provides a quick and easy way tosearch the most comprehensive compressor comparison databaseavailable on the market. You can search for any compressorregardless of its brand just by typing in a few letters from theproduct label. Compass will then give you the best matched Danfossalternative. Because the online software is linked to the DanfossProduct catalogue on the web, you can even get detailed technicalinformation on the suggested Danfoss alternative like datasheets,descriptions & photos.
ECL Comfort 310 Portal 0.9.13 APK
Danfoss A/S
If you have an ECL Comfort 310 you can use this application tooptimize and monitor heating systems. You can sign up for a freeaccount at ecl.portal.danfoss.com and register your ECL Comfort 310at the portal with a serial number and access code obtained in theECL Comfort 310 when the portal functionality is turned on. Withthe application you can easily access the portal and your ECLComfort 310 without a computer anytime you want.Key features:Changesettings for saving energy while maintaining the comfortSee currentstatus of sensors, pumps and motor valves for all circuitsChangethe daily schedule to suit your everyday lifeRequirements:An ECLComfort 310 district heating controller from Danfoss DistrictEnergy and a user account at the ECL Comfort 310 portal onecl.portal.danfoss.com. International users should change theserver address to http://ecl.portal.danfoss.com under the portalconfiguration menu after installation.
SiteService 1.0.0 APK
Danfoss A/S
Danfoss, a world leader in food retail refrigeration and airconditioning controls is proud to introduce the Danfoss SiteServiceApp. As the name suggests, the SiteService App offers the ServiceTechnician the ability to remotely connect to a Danfoss controlssystem. Once authorized the Technician gains a full visualizationof live plant status, alarms, history curves and device settings.Built from the ground up, the SiteService App is designed tosimplify some of the common service oriented tasks by providing asimple yet powerful interface to the most common areas of theDanfoss controls systemFeatures-Supporting Danfoss AK-SC255,AK-SC355, AK-SM800 series controllers-Address book to store yoursite connections-View live current status of plant(Refrigeration/HVAC/Lighting/Energy/Miscellaneous points)-Devicedetail view (Refrigeration/HVAC/Lighting/Energy/Miscellaneouspoints)-Read/Write parameter access-Manual control -Alarmmanagement (View current alarms, Acknowledge alarms, Acknowledgelist, cleared list)-History curves
TurboTool® 2.0.2 APK
Danfoss A/S
The Danfoss TurboTool™ App makes it easy for field servicetechnicians to troubleshoot Danfoss Turbocor compressor issues onsite. Field service technicians can utilize this App to identifysymptoms, work through the possible causes, and find remediesthrough suggested required actions. Instantly access the TurboTool™App for compressor troubleshooting and quick reference charts.Please note that the Troubleshooting Guide is meant as suggestionsfor experienced professionals familiar with Danfoss Turbocorcompressors and is not to be used by non-professionals. TurboTool™App belongs to Danfoss A/S How to Use When starting up theTurboTool™ App the user will be presented with two compressorimages. The exterior image of a Danfoss Turbocor compressorrepresents compressor system level troubleshooting, while thecutaway image of a Danfoss Turbocor compressor represents componentlevel troubleshooting. The user selects the area in which they areinterested. This will take them on to the “Symptoms” page wherethey will be able to search for the symptoms being exhibited by thesystem or component. Once the correct symptom has been identifiedit can be selected and expanded to reveal the possible causes ofthis symptom. The user should then select what they believe to bethe relevant cause and will be taken to the “Remedy” page wherethey will be informed of the procedures required to correct theexact symptom/cause. It is easy to move back and forward betweenthe symptom/cause and remedy pages should they need to try othersolutions. Disclaimer The TurboTool™ (“the Application”) isprovided on an “as is” and “as available” basis for the intendedpurposes as determined by Danfoss only and any use hereof is atUser’s sole risk. The Application and results and informationgenerated thereby cannot substitute technical advice but must beverified by the User, they are not promises and should not berelied on as accurate data or analyses. Danfoss disclaims allwarranties and conditions regarding the Application, whetherexpress, implied, or statutory, including, but not limited to,conditions of merchantability, satisfactory quality, fitness for aparticular purpose, accuracy and non-infringement of third parties’rights. Danfoss does not warrant that the Application will meetyour requirements or that the operation hereof will beuninterrupted or error-free. To the extent not prohibited by law,in no event shall Danfoss be liable for any direct, special,indirect or consequential damages, whatsoever, including, withoutlimitation, damage to property, damages for loss of savings orprofits, or loss of data arising out of any use of the Application.®Danfoss Turbocor TurboTool™ support, please [email protected] Please visithttp://turbocor.danfoss.com for more information and contactdetails.
Loading...