CraftPlace ئاپەکان
BoltUp 6.9
With this app you have ASME B16.5 and B16.47 Aand B, 1/2" to 60" flange information, SAE and SI, at your fingertips as well as a torque and tensioning calculator.A useful tool made by a UA Steamfitter for all controlledbolting technicians in the field, planning or QC departments.Use the tabs on top or swipe to navigate from screen toscreen.Select B16.5 for 1/2" to 24" or B16.47A for standard 26" to 60"or B16.47B for low profile 26" to 60" weld neck raised face or ringjoint type flanges.Select flange rating and pipe diameter.Select RTJ if desired and available for rating/diameter.Select SAE or Metric.All bolting info Is given including grip, effective, normal andtensiong length.The lengths can be modified to give the most accurate torque andtensioning info.A selection of the standard stud grades is available to beselected from to allow torque and tensioning calculations andensure preload doesn't exceed stud yield strength, which is alsogiven upon selection.Thread lubricant can be specified to allow for proper torquecalculation with the option to specify the frictioncoefficient.A graphic torque sequence is generated for convenience.Preload, residual load or percent of yield can be specified tocalculate torque and elongation of stud as well as pressure(s) fortensioning with the apropriate load cells being listed and onechosen that is rated for the maximum pressure used.Load transfer factor is calculated and can be specified.Cross load factor is suggested and can be specified.All calculations are industry approved or ASME recommended whengiven in the standard.