دەربارە
App Information IOIO-Q I/O Basic
- App NameIOIO-Q I/O Basic
- ناوی پاکەیجapp.inex.ioio.digital.digitaliobasic
- UpdatedJul 8, 2013
- قەبارەی فایلUndefined
- پێویستی بە ئەندرۆیدەAndroid 2.2
- وەشان1.2
- گەشەپێدەرINEX
- دابەزاندن-
- Priceخۆراییە
- هاوپۆڵ
- گەشەپێدەرInnovative Experiment Co.,Ltd. 108, Sukhumvit 101/2, Sukhumvit Rd, Bangna, Bangkok 10260
- Google Play Link
INEX درێژە...
UART RFID Reader 1.0 APK
Application for use with RFID Reader from Parallax to read ID fromRFID Card. No need any microcontroller, just android device whichOTG available.Use only UCON-UART from INEX and RFID Reader from Parallax to ReadID from any RFID Card with 125 KHz.RFID Reader : http://goo.gl/3LLYRrUCON-UART : http://goo.gl/YDt87See more detail from www.tpemagazine.com on issue 33Download source code from : https://github.com/akexorcist/INEX-RFIDReader
WiFly Switch Controller 1.0 APK
Application for control Unicon board via WiFito control LED. Use with WiFly Module from Sparkfun tocommunication by TCP connection. Make your android device to WiFiHotspot and programmed POP-BOT XT to connected to that hotspot. Youcan applied circuit to real light bulb or outlet in your home.If you want to control with the PC, use this.http://goo.gl/lf9Qo** WLAN only, not include internet connection.ZX-LED : http://goo.gl/X352hUnicon Board : http://goo.gl/95WTKRN-XV WiFly Module : http://goo.gl/AjHqYConnect WiFly Module to UART1 on pin 0 (RXD) and pin 1(TXD)connect pin 4 (A6) and 19 (A1) with 1st ZX-LEDconnect pin 12 (A11) and 21 (A3) with 2nd ZX-LEDconnect pin 30 (A2) and 20 (A2) with 3rd ZX-LEDconnect pin 6 (A7) and 22 (A4) with 4th ZX-LEDSource code for this project(Include C# for PC, Eclipse for Android, Arduino for Unicon Boardand .exe for PC)http://goo.gl/zMKOGWiFly's library for arduino to used with this applicationhttps://github.com/harlequin-tech/WiFlyHQSee more detail from www.tpemagazine.com on issue 38
WiFly Remote 1.1 APK
Application for control POP-BOX XT via WiFi.Use with WiFly Module from Sparkfun to communication by TCPconnection. Make your android device to WiFi Hotspot and programmedPOP-BOT XT to connected to that hotspot.You can control moving direction and get data from sensor onPOP-BOT XT** WLAN only, not include internet connection.If you want to control with the PC, use this.http://goo.gl/jkFMKZX-01 : http://goo.gl/VDNxWZX-03R : http://goo.gl/sRQmWPOP-BOT XT : http://goo.gl/durrNRN-XV WiFly Module : http://goo.gl/AjHqYConnect WiFly Module to UART1 on pin 0 (RXD) and pin 1(TXD)connect ZX-01 (Switch) to pin 22 (A4) and 23 (A5)and connect ZX-03R (Light reflector) on pin 18 (A0) and 19 (A1)Source code for this project(Include C# for PC, Eclipse for Android, Arduino for Unicon Boardand .exe for PC)http://goo.gl/UoCaqWiFly's library for arduino to used with this applicationhttps://github.com/harlequin-tech/WiFlyHQ
IOIO Inventor 1.1.1 APK
This app will communication between AppInventor's app and IOIO board to make your IOIO board available onapplication which developed by App Inventor. It's easier too createany app for IOIO board.How does IOIO Inventor work?http://doc.inex.co.th/ioio-board-how-does-ioio-inventor-work/How to use IOIO Inventor?http://doc.inex.co.th/ioio-board-how-to-use-ioio-inventor/In this tutorial, please change package name from"com.inex.ioioappinventor" to "com.inex.ioioappinventorinter" andchange from "com.inex.ioioappinventor.IOIOCommand" to"com.inex.ioioappinventorinter.IOIOCommand"[IOIO board] Command Code on App Inventor for IOIO Inventorhttp://doc.inex.co.th/ioio-board-command-code-on-app-inventor-for-ioio-inventor/
Bluetooth Direct 1.0 APK
Direct Bluetooth Connection for device whichcannot find some bluetooth deviceJust insert bluetooth address and connect it directly although thedevice did not found bluetooth device• Turn on bluetooth device• Insert device bluetooth address on Direct Bluetooth• Pair it• You will get paireing request dialog , finish!
Similar Apps درێژە...
IOIO Hardwarer Tester 1.06 APK
The IOIO Hardware Tester is the main application to inform you, ifyour phone is working properly with your IOIO board.The implemented functionality is to connect automatically toyour IOIO board and show you all informationen about its hardwareand software IDs. With the toggle button, the yellow onboard ledcan be swichted on and off.When you are succesfully connected to IOIO we would be happy ifyou clicked on the feedback button to send us automatically all theinformation which are displayed on the screen. With the feedback wetry to update these two pages:https://github.com/ytai/ioio/wiki/Supported-Deviceshttps://github.com/ytai/ioio/wiki/Supported-Bluetooth-Dongles
IOIO Servo Explorer APK
IOIO Servo Explorer gives you the ability totest your IOIO Board and your servos.You can connect to your IOIO using any of the 4 supportedconnection types.Just select the connection type and hit the ON/OFF Button. Once youconnect to your board, select the servo type from the list and useeither the 5 fixed angle buttons or the slider to change theservo-arm position.All events are properly logged in an easy to understand way.PWM Output uses pin 40, so you only need to connect your servo to5V, GND and then Data IN to pin 40.Have Fun!
IOIO Script - Easy Programming 1.05 APK
*** THIS APP IS NOW OBSOLETE, PLEASE USEDROIDSCRIPT WITH THE IOIO PLUGIN ***Easily write programs for the SparkFun IOIO board usingJavaScript. No need for a PC, just edit code directly on your phone(or edit on a PC if you prefer). You can write normal apps too!- Control 48 digital outputs.- Read 16 analog inputs.- Control 9 PWM outputs.- Control 9 servos.- Control 4 UARTs.- Control via USB or Bluetooth.- Access phone's sensors.- Send/Recieve commands via Wifi.- Stream video to your PC.- Draw graphics to screen.- Control Lego Mindstorms.- On phone documentation.- Plenty of samples.- Write other types of app.NOTE: Make sure you have USB debugging enabled and that you havethe official "IOIO Manager" software installed on your phone assome boards come with a firmware version which requires it.NOTE1: The "LED Dimmer" sample will not work on the OTG board asit has no PWM on pin zero.NOTE2: Due to ADB-USB security changes in JellyBean, only aBluetooth connection can be used at the moment.Please let us know via email or the forum what other samples youwould like added and what functionality you would like to see inthe next version.Forum: http://bit.ly/12QWpox-- THIS IS BETA SOFTWARE --So please be kind and send issues to us atSmartphoneRemote@gmail.com or post on the forum instead of puttingnegative comments on google play. Thankyou.*** 48 hour 'peace of mind' refund available. Just email uswithin 48 hours of purchase for a full refund ***Please rate this app if you like it!
IOIO-Droid Sensor Manager 1.0.3 APK
Have you ever been looking for an easy andconvenient way to measure sensor data with your IOIO?Then IOIO-Droid Sensor Manager is exactly what you were lookingfor! Simply configure your set of sensors and press Start. That'sall! But there is more. IOIO-Droid is offering a lot more features.And the best thing is: It's for free!!!Here is a list of features IOIO-Droid is offering you:- manage your set of sensors (add, delete, edit, pause)- start and stop measuring processes by simply pressing abutton- view measured values (even during measuring processes)- upload your measured values (manually or automatically) toXively.com - the internet of things platform - for further usage(optional)- record your devices location frequently and upload it toXively.com (optional)- export your measured values (and more) as *.csv files to yourdevice's external storage- use the simulation mode to test all application features withoutconnecting a IOIO boardTips and tricks:- use the help function to learn more about IOIO-Droid- to use Xively.com you need an account, your API-Key and your FeedID- do a long-click to edit an existing sensor- press a sensor's pause-icon to pause it, meaning it is not usedduring your measuring process (this way you don't have to configureyour sensors that you often use again and again)If you have any questions, comments or suggestions don'thesitate and send me an email.
Remote App for IOIO Rover 1.0 APK
First upload of the Capstone ProjectApplication namely Android Surveillance Remote Application for IOIORover.This application aims to control a functional rover that has a 4mechanical wheels, pan tilt servos and an ultrasonic sensor withcamera footage of the rover's point of view and a photo capture.Stay tuned for the updates of this IOIO project, resources anddetailed description will be posted later.
IOIO XCSoar Bridge 1.1 APK
This is app was created because the Koboreaderinstalled with XCSoar can not talk directly to the older(not OTG)IOIO Boards.First you need to enable Kobo's WIFI and connect it to yourWIFIHotspot activated on your android mobile device which shouldbeconnected to you ioio device. In most cases you android devicewillhave 192.168.43.1 as ip address.The app will automaticly detect when the ioio device hasbeenconnected to you IOIO and will reconnect if physical USBconnectionwas interrupted. You should also configure the correctuart portbaud rate according to the baudrate of you LX or FLARMdeviceconnected to the IOIO Board.Configure XCSoar by using the TCP client driver by setting theIPaddress and TCP port.It's also possible to connect 2 KOBO's to the bridge. Thiscouldbe interesting when flying in double seaters.TCP listen ports are defined according the XCSoar TCPclientpresets.The bridge is configured as described below:Uart 0 <--> TCP Port 4352 and 2000Uart 1 <--> TCP Port 4353 and 10110Sending command vom XCSoar to your LX or whatever device(forexample changing MC Ready) should also work, but has notbeenthroughout tested.Downloading flightlogs does not work and will probablyneverwork.This is free software, developed by Christian Jürges in myfreetime and for fun. New developers welcome. Feedbacksappreciated.Get the sourceat:https://gitlab.eqipe.ch/chris/IOIOXCSoarBridgeThanks a lot to the XCSoar team for their great work.