Top 14 Apps Similar to IOIO-Q Project

The IOIO Hardware Tester is the main application to inform you,ifyour phone is working properly with your IOIO board.The implemented functionality is to connect automatically toyourIOIO board and show you all informationen about its hardwareandsoftware IDs. With the toggle button, the yellow onboard ledcan beswichted on and off.When you are succesfully connected to IOIO we would be happyifyou clicked on the feedback button to send us automatically alltheinformation which are displayed on the screen. With the feedbackwetry to update these two pages:https://github.com/ytai/ioio/wiki/Supported-Deviceshttps://github.com/ytai/ioio/wiki/Supported-Bluetooth-Dongles

IOIO Board Tester

Camera Robot powered by IOIO

This application is used for port pins. IOIO board digital output

This is app was created because theKoboreaderinstalled with XCSoar can not talk directly to theolder(not OTG)IOIO Boards.First you need to enable Kobo's WIFI and connect it toyourWIFIHotspot activated on your android mobile device whichshouldbeconnected to you ioio device. In most cases you androiddevicewillhave 192.168.43.1 as ip address.The app will automaticly detect when the ioio devicehasbeenconnected to you IOIO and will reconnect if physicalUSBconnectionwas interrupted. You should also configure thecorrectuart portbaud rate according to the baudrate of you LX orFLARMdeviceconnected to the IOIO Board.Configure XCSoar by using the TCP client driver by settingtheIPaddress and TCP port.It's also possible to connect 2 KOBO's to the bridge.Thiscouldbe interesting when flying in double seaters.TCP listen ports are defined according the XCSoarTCPclientpresets.The bridge is configured as described below:Uart 0 <--> TCP Port 4352 and 2000Uart 1 <--> TCP Port 4353 and 10110Sending command vom XCSoar to your LX or whateverdevice(forexample changing MC Ready) should also work, but hasnotbeenthroughout tested.Downloading flightlogs does not work and willprobablyneverwork.This is free software, developed by Christian Jürges inmyfreetime and for fun. New developers welcome.Feedbacksappreciated.Get thesourceat:https://gitlab.eqipe.ch/chris/IOIOXCSoarBridgeThanks a lot to the XCSoar team for their great work.

IOIO Bluetooth Device Control Application istoallow you to control various electrical devices up to 8 devicesandindependently controlled.Use Android Bluetooth mobile device to remote control yourdeviceswith IOIO Board and Bluetooth Dongle.For Automation System ,Smart Home Automation ,lightcontroletc.The program features.- Control up to 8 devices with Relay Board. ( and can testcontrolLED on IOIO Board )- Show Bluetooth Connecting status- Run on Background Service so when go to other App,IOIOControldevice App still running.- Change and Edit your button name. (New Function 1.5+)- Free Version with Ad.Version 1.1 +- Run IOIO on Background Service ( Show Icon on Notification Bar ).So, The App connect IOIO all the time until stop service (StopFunction on Notification Bar )Hardware1. USB Bluetooth Dongle2. IOIO Board ( new version support over Bluetooth )3. 8 channel Output Relay BoardFor the IOIO Board , you don’t need program hex code orflashcode in to the IOIO Board.It has firmware for ready to use. You are only wiring the cabletothe relay board only.More About hardware :http://androidcontrol.blogspot.com/2012/06/ioio-board-over-bluetooth.htmlInfo & Manualhttp://androidcontrol.blogspot.com/2012/06/ioio-bluetooth-control-devices.htmlFull Android Source Code. It cost 10 - 50 USD.Please. contact amphancm@gmail.com26 Jan 2014

*** THIS APP IS NOW OBSOLETE, PLEASEUSEDROIDSCRIPT WITH THE IOIO PLUGIN ***Easily write programs for the SparkFun IOIO boardusingJavaScript. No need for a PC, just edit code directly on yourphone(or edit on a PC if you prefer). You can write normal appstoo!- Control 48 digital outputs.- Read 16 analog inputs.- Control 9 PWM outputs.- Control 9 servos.- Control 4 UARTs.- Control via USB or Bluetooth.- Access phone's sensors.- Send/Recieve commands via Wifi.- Stream video to your PC.- Draw graphics to screen.- Control Lego Mindstorms.- On phone documentation.- Plenty of samples.- Write other types of app.NOTE: Make sure you have USB debugging enabled and that youhavethe official "IOIO Manager" software installed on your phoneassome boards come with a firmware version which requires it.NOTE1: The "LED Dimmer" sample will not work on the OTG boardasit has no PWM on pin zero.NOTE2: Due to ADB-USB security changes in JellyBean, onlyaBluetooth connection can be used at the moment.Please let us know via email or the forum what other samplesyouwould like added and what functionality you would like to seeinthe next version.Forum: http://bit.ly/12QWpox-- THIS IS BETA SOFTWARE --So please be kind and send issues to usatSmartphoneRemote@gmail.com or post on the forum instead ofputtingnegative comments on google play. Thankyou.*** 48 hour 'peace of mind' refund available. Just emailuswithin 48 hours of purchase for a full refund ***Please rate this app if you like it!

Time to change IOIO and IOIO-Q board to Robot car

IOIO Servo Explorer gives you the abilitytotest your IOIO Board and your servos.You can connect to your IOIO using any of the 4 supportedconnectiontypes.Just select the connection type and hit the ON/OFF Button. Onceyouconnect to your board, select the servo type from the list anduseeither the 5 fixed angle buttons or the slider to changetheservo-arm position.All events are properly logged in an easy to understand way.PWM Output uses pin 40, so you only need to connect your servoto5V, GND and then Data IN to pin 40.Have Fun!

Hello World!안녕하세요!한국산업기술대학교 프로젝트팀 Tech4Human 입니다.이프로젝트는 UC어바인의 Nicolas Oros의 프로젝트에서 영감을 받아 제작되었습니다.(주1)프로젝트의 목적은 안드로이드 디바이스와 구글의 IOIO보드를 이용하여 추가모듈장착을 자제하고, 디바이스의자원을최대한으로 이용하는 최소의 비용으로 제작가능한 RC카를 만드는 것입니다.또한 전체코드, 회로, 관련자료를 공개하오니,(주2)직접 제작하여 움직여보는 즐거움을 느껴보세요.. +_+/Tech4human, 인간을 위한 기술개발자 : 강상묵, 김정민, 권오철, 정단일PS.*영상개선에 많은 도움을 주신 한국산업기술대학교 류장선 교수님께 감사의 말씀을 전합니다.. +_+bㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[테스트 방법]https://play.google.com/store/apps/details?id=com.IOIO.Tech4Human을다운로드 하셔서 IOIO쪽과 컨트롤러쪽의 아이피를 반대로 입력합니다.EX) IOIO IP : 192.168.10.100컨트롤러IP : 192.168.10.101이라면 프로그램을 실행하신후 IOIO의 IP 입력창에는 192.168.10.101을, 컨트롤러의IP입력창에는192.168.10.100을 넣습니다. 그후 IOIO쪽을 먼저 붙여주시고(토글버튼) 그다음컨트롤러를붙입니다.(일반버튼)(주1)[니콜라스 형님 홈페이지]http://www.cogsci.uci.edu/~noros/android_car.html(주2)[회로, 관련문서 다운로드]https://www.dropbox.com/s/71p3rzgl8vqosa7/document.zip[전체코드 다운로드]https://code.google.com/p/forbiddenuntiloctober/

This application is compatible with the 74HC595 iSCSI register.

https://play.google.com/store/apps/details?id=com.RCCAR.Tech4Human을 참조하세요..IOIO<-RC CAR는 자동차에 붙여야 합니다.컨트롤러의 IP주소를 넣고 토글버튼을 눌러주면 카메라의 영상을 컨트롤러로 전송합니다.https://play.google.com/store/apps/details?id=com.RCCAR.Tech4HumanSee ..IOIO <-RC CAR must be affixed to the car.Insert the IP address of the controller by pressing thetogglebutton when the camera's image is sent to the controller.

Have you ever been looking for an easyandconvenient way to measure sensor data with your IOIO?Then IOIO-Droid Sensor Manager is exactly what you werelookingfor! Simply configure your set of sensors and press Start.That'sall! But there is more. IOIO-Droid is offering a lot morefeatures.And the best thing is: It's for free!!!Here is a list of features IOIO-Droid is offering you:- manage your set of sensors (add, delete, edit, pause)- start and stop measuring processes by simply pressingabutton- view measured values (even during measuring processes)- upload your measured values (manually or automatically)toXively.com - the internet of things platform - for furtherusage(optional)- record your devices location frequently and upload ittoXively.com (optional)- export your measured values (and more) as *.csv files toyourdevice's external storage- use the simulation mode to test all application featureswithoutconnecting a IOIO boardTips and tricks:- use the help function to learn more about IOIO-Droid- to use Xively.com you need an account, your API-Key and yourFeedID- do a long-click to edit an existing sensor- press a sensor's pause-icon to pause it, meaning it is notusedduring your measuring process (this way you don't have toconfigureyour sensors that you often use again and again)If you have any questions, comments or suggestions don'thesitateand send me an email.

First upload of the CapstoneProjectApplication namely Android Surveillance Remote Applicationfor IOIORover.This application aims to control a functional rover that has a4mechanical wheels, pan tilt servos and an ultrasonic sensorwithcamera footage of the rover's point of view and a photocapture.Stay tuned for the updates of this IOIO project, resourcesanddetailed description will be posted later.