3.3.0 / June 27, 2016
(4.6/5) (10)

Beschreibung

The Precitec ProCutter App is used to displaythe cutting head condition during operation and to query errormessages. As an option the app can also be used to set some sensorvalue parameters. The app connects via Bluetooth with the laserhead and shows the sensor values in different windows. There areseven different windows: connection, temperature, pressure, optics,errors, IO and system.

• Connection: shows active Bluetooth devices in thenetwork
• Temperature: shows the sensor values of the four temperaturesensors
• Pressure: shows cutting gas pressure and purging airpressure
• Optics: looks different, because of different laser headtypes
- Normal: focal positions, potentiometer offset, diffused light,lens configuration.
- ZoomCutter: aspect ratio replaces the lens configuration.
- Manual: just diffused light is shown.
• Errors: shows active error messages. If no error exists, thescreen is empty.
• IO: shows the IO-interface, with analogue voltages, currents andsignals.
• System: laser head firmware version and serial number.

Besides, in the system window there is a button. This buttonstarts the record of the measurement values. The measurement valuesare stored in a *.csv file, which is created in the memory of theused device. The App has two access modes, USER and OEM. Thedetermination is regulated through two different PINs. Users withUSER-rights can define the memory location and the sampling rate ofthe .csv file. Besides the USER can change his own PIN. The OEM canadditionally configure thresholds for the laser head. Furthermorethe OEM can change his own and the USER-PIN.

The functionality of the app could be restricted, because ofdifferent laser head firmware versions. The IO window is notsupported with firmware lower than 2.0.0. Also the one-time PINalgorithm is not supported for firmware versions below 2.0.3. Withthis algorithm a one-time change of your PIN is possible, when thePIN was forgotten or wrong entered.

The App works just as a display when the laser head is connectedthrough CAN. It is not possible to change any thresholds with theApp and the IO window is hidden.

The manuals in English and German versions are delivered in thepdf-format within the app. During the first start of the app, afterapproving the GTC, both versions of the manuals will be stored inthe download-section of the used device. Besides it is possible toopen the manual in the settings of the app. Depending on the usedlanguage in the device the German or English version will be shown.To display the manuals a pdf-viewer is required.

App Information Precitec ProCutter

Precitec ProCutter APK Dateien History

Select Precitec ProCutter Version :
  • 3.3.0 (11) - Neueste Version
  • 3.0.0 (7)
  • 2.2.6 (6)
  • Precitec ProCutter 3.3.0 APK File

    Datum: 2021 /10/13
    Erforderliche Android-Version: Android 4.0+ (Ice Cream Sandwich, API: 14)
    Datei: 5.9 MB
    Tested on: Android 10 (Quince Tart, API: 29)
    File Sha1: e45698694e67e9bc2bd06a9c7adb0558f533b418
    APK Signature: 2495f0f4588d6ecd4e6d7dfebce41d94b58aad28
  • Precitec ProCutter 3.0.0 APK File

    Datum: 2017 /3/13
    Erforderliche Android-Version: Android 4.0+ (Ice Cream Sandwich, API: 14)
    Datei: 4.9 MB
    Tested on: Android 4.4 (KitKat, API: 19)
    File Sha1: cffce7c109533d2b1e67a475a0ef9f69f1c9cbe1
    APK Signature: 2495f0f4588d6ecd4e6d7dfebce41d94b58aad28
  • Precitec ProCutter 2.2.6 APK File

    Datum: 2016 /4/13
    Erforderliche Android-Version: Android 4.0+ (Ice Cream Sandwich, API: 14)
    Datei: 4.9 MB
    Tested on: Android 4.4 (KitKat, API: 19)
    File Sha1: 364c180a72b6a00409fe77539def8a4819ebf68e
    APK Signature: 2495f0f4588d6ecd4e6d7dfebce41d94b58aad28

Precitec GmbH & Co. KG Zeig Mehr...

Precitec ProCutter 3.3.0 APK
The Precitec ProCutter App is used to displaythe cutting head condition during operation and to query errormessages. As an option the app can also be used to set some sensorvalue parameters. The app connects via Bluetooth with the laserhead and shows the sensor values in different windows. There areseven different windows: connection, temperature, pressure, optics,errors, IO and system.• Connection: shows active Bluetooth devices in thenetwork• Temperature: shows the sensor values of the four temperaturesensors• Pressure: shows cutting gas pressure and purging airpressure• Optics: looks different, because of different laser headtypes- Normal: focal positions, potentiometer offset, diffused light,lens configuration.- ZoomCutter: aspect ratio replaces the lens configuration.- Manual: just diffused light is shown.• Errors: shows active error messages. If no error exists, thescreen is empty.• IO: shows the IO-interface, with analogue voltages, currents andsignals.• System: laser head firmware version and serial number.Besides, in the system window there is a button. This buttonstarts the record of the measurement values. The measurement valuesare stored in a *.csv file, which is created in the memory of theused device. The App has two access modes, USER and OEM. Thedetermination is regulated through two different PINs. Users withUSER-rights can define the memory location and the sampling rate ofthe .csv file. Besides the USER can change his own PIN. The OEM canadditionally configure thresholds for the laser head. Furthermorethe OEM can change his own and the USER-PIN.The functionality of the app could be restricted, because ofdifferent laser head firmware versions. The IO window is notsupported with firmware lower than 2.0.0. Also the one-time PINalgorithm is not supported for firmware versions below 2.0.3. Withthis algorithm a one-time change of your PIN is possible, when thePIN was forgotten or wrong entered.The App works just as a display when the laser head is connectedthrough CAN. It is not possible to change any thresholds with theApp and the IO window is hidden.The manuals in English and German versions are delivered in thepdf-format within the app. During the first start of the app, afterapproving the GTC, both versions of the manuals will be stored inthe download-section of the used device. Besides it is possible toopen the manual in the settings of the app. Depending on the usedlanguage in the device the German or English version will be shown.To display the manuals a pdf-viewer is required.