Описание
информация о приложении IOIO-Q LED Brightness
- Имя приложенияIOIO-Q LED Brightness
- Название приложенияapp.inex.ioio.pwm.ledbrightness
- Дата публикацииJul 8, 2013
- Размер файлаUndefined
- ТребованияAndroid 2.2
- Версия1.2
- РазработчикINEX
- Количество установок-
- ЦенаБесплатно
- Категория
- РазработчикInnovative Experiment Co.,Ltd. 108, Sukhumvit 101/2, Sukhumvit Rd, Bangna, Bangkok 10260
- Google Play Link
INEX Ещё...
UART RFID Reader 1.0 APK
Application for use with RFID Reader from Parallax to read ID fromRFID Card. No need any microcontroller, just android device whichOTG available.Use only UCON-UART from INEX and RFID Reader from Parallax to ReadID from any RFID Card with 125 KHz.RFID Reader : http://goo.gl/3LLYRrUCON-UART : http://goo.gl/YDt87See more detail from www.tpemagazine.com on issue 33Download source code from : https://github.com/akexorcist/INEX-RFIDReader
WiFly Switch Controller 1.0 APK
Application for control Unicon board via WiFito control LED. Use with WiFly Module from Sparkfun tocommunication by TCP connection. Make your android device to WiFiHotspot and programmed POP-BOT XT to connected to that hotspot. Youcan applied circuit to real light bulb or outlet in your home.If you want to control with the PC, use this.http://goo.gl/lf9Qo** WLAN only, not include internet connection.ZX-LED : http://goo.gl/X352hUnicon Board : http://goo.gl/95WTKRN-XV WiFly Module : http://goo.gl/AjHqYConnect WiFly Module to UART1 on pin 0 (RXD) and pin 1(TXD)connect pin 4 (A6) and 19 (A1) with 1st ZX-LEDconnect pin 12 (A11) and 21 (A3) with 2nd ZX-LEDconnect pin 30 (A2) and 20 (A2) with 3rd ZX-LEDconnect pin 6 (A7) and 22 (A4) with 4th ZX-LEDSource code for this project(Include C# for PC, Eclipse for Android, Arduino for Unicon Boardand .exe for PC)http://goo.gl/zMKOGWiFly's library for arduino to used with this applicationhttps://github.com/harlequin-tech/WiFlyHQSee more detail from www.tpemagazine.com on issue 38
WiFly Remote 1.1 APK
Application for control POP-BOX XT via WiFi.Use with WiFly Module from Sparkfun to communication by TCPconnection. Make your android device to WiFi Hotspot and programmedPOP-BOT XT to connected to that hotspot.You can control moving direction and get data from sensor onPOP-BOT XT** WLAN only, not include internet connection.If you want to control with the PC, use this.http://goo.gl/jkFMKZX-01 : http://goo.gl/VDNxWZX-03R : http://goo.gl/sRQmWPOP-BOT XT : http://goo.gl/durrNRN-XV WiFly Module : http://goo.gl/AjHqYConnect WiFly Module to UART1 on pin 0 (RXD) and pin 1(TXD)connect ZX-01 (Switch) to pin 22 (A4) and 23 (A5)and connect ZX-03R (Light reflector) on pin 18 (A0) and 19 (A1)Source code for this project(Include C# for PC, Eclipse for Android, Arduino for Unicon Boardand .exe for PC)http://goo.gl/UoCaqWiFly's library for arduino to used with this applicationhttps://github.com/harlequin-tech/WiFlyHQ
IOIO Inventor 1.1.1 APK
This app will communication between AppInventor's app and IOIO board to make your IOIO board available onapplication which developed by App Inventor. It's easier too createany app for IOIO board.How does IOIO Inventor work?http://doc.inex.co.th/ioio-board-how-does-ioio-inventor-work/How to use IOIO Inventor?http://doc.inex.co.th/ioio-board-how-to-use-ioio-inventor/In this tutorial, please change package name from"com.inex.ioioappinventor" to "com.inex.ioioappinventorinter" andchange from "com.inex.ioioappinventor.IOIOCommand" to"com.inex.ioioappinventorinter.IOIOCommand"[IOIO board] Command Code on App Inventor for IOIO Inventorhttp://doc.inex.co.th/ioio-board-command-code-on-app-inventor-for-ioio-inventor/
Bluetooth Direct 1.0 APK
Direct Bluetooth Connection for device whichcannot find some bluetooth deviceJust insert bluetooth address and connect it directly although thedevice did not found bluetooth device• Turn on bluetooth device• Insert device bluetooth address on Direct Bluetooth• Pair it• You will get paireing request dialog , finish!
Похожие Ещё...
IOIO Hardwarer Tester 1.06 APK
The IOIO Hardware Tester is the main application to inform you, ifyour phone is working properly with your IOIO board.The implemented functionality is to connect automatically toyour IOIO board and show you all informationen about its hardwareand software IDs. With the toggle button, the yellow onboard ledcan be swichted on and off.When you are succesfully connected to IOIO we would be happy ifyou clicked on the feedback button to send us automatically all theinformation which are displayed on the screen. With the feedback wetry to update these two pages:https://github.com/ytai/ioio/wiki/Supported-Deviceshttps://github.com/ytai/ioio/wiki/Supported-Bluetooth-Dongles